Pipe Specification Properties - Intergraph Smart 3D - Help - Hexagon PPM

Intergraph Smart 3Dx Property Descriptions

Language
English
Product
Intergraph Smart 3D
Subproduct
3Dx
Search by Category
Help
Smart 3D Version
13

Displays properties for pipe specifications. A piping specification is represented by piping materials classes, which define the requirements, characteristics, and behavior of the piping commodities for a specific service. Typically, the piping specification is specific to a project.

The order in which the properties display in your view depends on your configuration.

Approval Date

Specifies the time or date the status of the piping materials class was approved.

Approval State

Specifies the status of the selected object or filter. Changing this property sets the Status. The display depends on your access level. You might be unable to change the status of the object. The list is defined by the ApprovalStatus codelist.

Smart 3Dx saves an object to the database when you change that object's status. Use Undo (CTRL + Z) to reverse the status change.

You can only edit or manipulate an object with a status of Working.

Approved by

Specifies the name of the person or group who approved the status of the piping materials class.

Automated Flange Selection Option

Select enabled to activate the automated flange selection logic to distinguish between flanges inserted on plain piping versus fitting-to-fitting situations. Typically, you would enable this option for piping material classes that include slip-on flanges or lap-joint flanges. See Automated Flange Selection.

  • If disabled, the generic short code for the flange that is subject to automated flange selection is used for this piping material class.

  • If enabled, the software selects the generic short code for the flange for plain piping or selects the flange for a fitting based on where the flange is inserted.

Comments

Specifies a brief comment describing the justification for the piping materials class status.

Created by

Specifies the name of the person who created the object.

Date Created

Specifies the creation date of the object.

Date Last Modified

Specifies the date of the last modification to the object.

Design Standard

Specify the design standard that you want to use in this piping materials class to calculate the piping wall thickness and the branch reinforcements.

Examination Practice

Specifies the parent category for the Examination property.

Fluid Service

Specifies the intended fluid service for this piping materials class. You may want to include the physical state of the fluid. Examples are, Potable Water, High Pressure Steam, Underground Water, or Chilled Water. In the case of a jacketed piping specification, this property represents the fluid service for the core.

Gasket Requirement Override

Specifies the gasket override code for the piping material class.

Hyperlink

Specifies the URL or local file path associated with the object. Click the hyperlink to open the page or object in your default browser. Point to the hyperlink to display the URL or path as a tooltip.

Description

Specifies the descriptive text associated with the hyperlink.

URL

Specifies the web address or local file name associated with the hyperlink. The URL must include the protocol, such as http: or https:, as well as the domain name. For example, https://hexagonppm.com/.

Hyperlink To Human Specification

Specifies the location of the electronic version of the piping materials class. You can specify the location using the http:// protocol or by using a Universal Resource Location (URL) address (for example, \\server\share).

Jacket and Jumper Fluid Service

Specifies the intended fluid service for jackets and jumpers in this piping materials class. You may want to include the physical state of the fluid. Examples are, Potable Water, High Pressure Steam, or Chilled Water.

Jacket Material of Construction Class

Specifies the construction class material for the jacket.

Jacket Materials Description

Specifies a generic description of the material used for jackets in this piping materials class. An example is, CL150, Carbon Steel, RFFE, Trim 8, < 2" SWE, >= 2" BE. Do not include the intended fluid service or applicable corrosion allowance.

Jumper Materials Description

Specifies a generic description of the material used for jumpers in this piping materials class.

Jumper Materials of Construction Class

Specifies the material of construction class for the jumper.

Last Modified by

Specifies the name of the person who last modified the object.

Last Modified on

Specifies the time or date the status of the piping materials class was set.

Lining Requirements

Specifies whether or not field lining is required in this piping material class. If you set this to Lined, you need to define information in the Field Lining Thickness rule.

Materials Description

Specifies a generic description of the material used for this piping materials class. An example is, CL150, Carbon Steel, RFFE, Trim 8, < 2" SWE, >= 2" BE. Do not include the intended fluid service or applicable corrosion allowance. This property is used in reporting.

Materials Group

Specifies the material group for the materials class.

Materials of Construction Class

Specifies the material of construction class. This option is used for grouping similar piping material classes for the benefit of the specification writer in managing piping specifications.

Piping Commodity Override Option

Specifies whether you want to disable, enable with no justification required, or enable with justification required the ability of a piping designer to override the piping materials class to select a piping commodity manually.

This setting overrides the piping commodity override option setting on the Model Options node for this piping material class.

Piping Note 1

Specifies standard notes associated with the object.

Piping Note 10

Specifies standard notes associated with the object.

Piping Note 2

Specifies standard notes associated with the object.

Piping Note 3

Specifies standard notes associated with the object.

Piping Note 4

Specifies standard notes associated with the object.

Piping Note 5

Specifies standard notes associated with the object.

Piping Note 6

Specifies standard notes associated with the object.

Piping Note 7

Specifies standard notes associated with the object.

Piping Note 8

Specifies standard notes associated with the object.

Piping Note 9

Specifies standard notes associated with the object.

Piping Spec Status

Specifies the status of the piping materials class.

Responsibility

Specifies the name of the person or group responsible for specifying the status of the piping materials class.

Revision Number

Specifies the revision number of the piping materials class. If you have enabled the Piping Spec Version Management Option in the Model Options node in Catalog or the Default Project Options sheet, the text that you enter here is appended to the end of the piping specification name. For example, if the piping specification is originally named 1C0100, the piping specification with the revision is named "1C0100, Rev: <text>". You must change this revision number manually each time you make a change to a piping specification.

Specification Name

Specifies the name to assign to the specification.

Stress Relief Practice

Specifies the parent select list for the Stress Relief property.

Stress Relief Requirement

Specifies the stress relief requirement for the material class. If you do not define a value, the software assigns a value of 1 (Undefined) by default.

Washer Creation Option

Specifies whether or not the software should create washers at a bolted joint.

Welding Procedure Practice

Specifies the parent category for the Welding Procedure Specification property.