Displays the properties of edge reinforcement systems. An edge reinforcement system stiffens a free edge of a plate system. A free edge is a plate edge that has no logical connections, such as an opening.
The order in which the properties display in your view depends on your configuration.
Active
Specifies whether a leaf system is active and applicable for modeling, drawing, and
reporting operations. To exclude the leaf system from these operations, select No. In the hierarchy explorer, the lock icon 
is shown over the icon of the deactivated leaf system, and the detailed or light
part associated with the leaf system is also deleted. In addition, because connections
to deactivated leaf system are not valid, you must resolve such invalid connections
in the To Do List. To change the leaf profile system back to the active state, select Yes; however, to have the detailed part, you must detail the leaf system explicitly.
See Marine Structure Hierarchy in the Workspace Explorer for more information on leaf systems.
Approval State
Specifies the status of the selected object or filter. Changing this property sets the Status. The display depends on your access level. You might be unable to change the status of the object. The list is defined by the ApprovalStatus codelist.
Smart 3Dx saves an object to the database when you change that object's status. Use Undo (CTRL + Z) 
to reverse the status change.
You can only edit or manipulate an object with a status of Working.
Continuity Type
Specifies the way in which the object system reacts when the system intersects another object system (your automatic splitting preference). The list is defined by the StructContinuity codelist.
Continuous
Indicates that the object system should split the other object system.
Intercostal
Indicates that the object system should be split by the other object system.
You cannot split objects that have a Continuity Type setting of Continuous.
Created By
Specifies the name of the person who created the object.
Cross Section Name
Specifies the name of the cross section.
Cross Section Type
Specifies the cross section type associated with the object.
Date Created
Specifies the creation date of the object.
Date Last Modified
Specifies the date of the last modification to the object.
Dry Center of Gravity
Specifies the location of the dry center-of-gravity for the object.
Dry Weight
Specifies the dry weight of the object.
End Connection Type
Specifies the connection type associated with the end of the object.
Edge Reinforcement Offset
Specifies the offset value for the landing curve from the base curve.
Flange Direction
Specifies the direction of the web thickness for symmetrical crossing-sections or the direction of the flange and web thickness for unsymmetrical cross-sections.
Has Substituted Boundary
Specifies whether the object has a substituted boundary.
Has Substituted Definition Object
Specifies whether the object has a substituted definition object.
Hyperlink
Specifies the URL or local file path associated with the object. Click the hyperlink to open the page or object in your default browser. Point to the hyperlink to display the URL or path as a tooltip.
Description
Specifies the descriptive text associated with the hyperlink.
URL
Specifies the web address or local file name associated with the hyperlink. The URL must include the protocol, such as http: or https:, as well as the domain name. For example, https://hexagonppm.com/.
Is Named by Rule
Specifies whether the object name is determined by a rule.
Is Root
Indicates whether an object is a root system.
Last Modified by
Specifies the name of the person who last modified the object.
Load Point
Specifies the cross-section load point through which the landing curve passes.
Mounting Face
Specifies the cross-section face to mount to the plate system. The options vary depending on the profile cross-section.
Name
Specifies the name of the selected object. If the name is too long to entirely display
in the box, point to the box to display the complete name as a tool tip. If the name
is not defined by a rule, 
User Defined displays. If this name is generated by a naming rule, 
Naming Rule displays. If you type a name in this box, Smart 3Dx automatically changes the naming rule to User Defined.
Naming Category
Specifies the naming category. The naming rule uses the category in naming the profile part that is a child to the profile system.
Naming Rule Prog ID
Specifies the Prog ID associated with the naming rule.
Orientation
Specifies the orientation of the edge reinforcement.
Parent System
Specifies the parent system for the object. Recently used systems that are appropriate to assign as the parent system for this object as well as the Select from Workspace and Select from Model options display in the list. The most recently used system displays at the top.
The parent system of the object must have an Approval Status of Working before you can change the Parent System value. If the Approval Status of the parent system is not set to Working, this value is read-only.
Select Interactively
Turns on or off the interactive selection. When this option is on, you can select the parent object in a graphic view or any of the explorers.
Select from Workspace
Displays the Select Parent System Dialog with the Workspace tab open. The workspace is the subset of the active model database you specified when you started your design session. Navigate the hierarchy to select the parent system, and then click OK.
Select from Model
Displays the Select Parent System Dialog with the Model tab open. The model is all of the objects in the active model database, including those that are not part of your workspace. Navigate the hierarchy to select the parent system, and then click OK.
Position
Specifies how the cross section of the profile is attached to the free edge.
On Edge - Centered
Indicates that the cross-section is centered on the plate thickness using the cross-section load point that you select.
On Edge - Offset
Indicates that the cross- section load point is offset from the free edge the distance you specify in the Offset box.
On Face
Indicates that the cross-section load point is placed on the face of the plate. The load point can be offset from the free edge the distance you specify in the Offset box.
Priority Number
Specifies the relative continuity priority. For example, if a continuous part of priority 1 intersects a continuous part of priority 2, the priority 2 part is intercostal at the intersection.
Profile Type
Specifies the profile type of the part. The list is defined by the StrMfgProfileType codelist.
Start Connection Type
Specifies the connection type associated with the beginning of the object.
Web Thickness Offset
Specifies the offset direction along the plate face.
Web Thickness Orientation
This property is not used.
Wet Center of Gravity
Specifies the location of the wet center-of-gravity for the object.