Displays properties for stand alone stiffener parts. A stand along stiffener part is a stiffener that does not have a parent plate system.
The order in which the properties display in your view depends on your configuration.
Approval State
Specifies the status of the selected object or filter. Changing this property sets the Status. The display depends on your access level. You might be unable to change the status of the object. The list is defined by the ApprovalStatus codelist.
Smart 3Dx saves an object to the database when you change that object's status. Use Undo (CTRL + Z) to reverse the status change.
You can only edit or manipulate an object with a status of Working.
Area
Specifies the cross-section area for the object. This property is read-only. To change this value, edit the object properties in Catalog or in the corresponding workbook.
Attachment Method
Specifies the method of trimming the profile web where it is attached to the plate system. The list is defined by the ShipStructStiffenerAttachmentMethod codelist.
Partial Trim indicates that Smart 3Dx trims the short side of the web.
No Trim indicates that Smart 3Dx does not trim the web.
Full Trim indicates that Smart 3Dx trims the entire web.
Build Method
Specifies the method used to position child objects in the block. The list contains all available values as defined in the reference data for the assigned workcenter, typically Vertical Drop, Drop at angle, Slide, and Default. The list is defined by the BuildMethodData codelist.
Created by
Specifies the name of the person who created the object.
Cross Section Name
Specifies the name of the cross section.
Cross Section Type
Specifies the cross section type associated with the object.
Curved
Specifies whether the profile is curved.
Date Created
Specifies the creation date of the object.
Date Last Modified
Specifies the date of the last modification to the object.
Dry Center of Gravity
Specifies the location of the dry center-of-gravity for the object.
End Connection Type
Specifies the connection type associated with the end of the object.
Flange Direction
Specifies the direction of the web thickness for symmetrical crossing-sections or the direction of the flange and web thickness for unsymmetrical cross-sections.
Has Substituted Boundary
Specifies whether the object has a substituted boundary.
Has Substituted Definition Object
Specifies whether the object has a substituted definition object.
Hyperlink
Specifies the URL or local file path associated with the object. Click the hyperlink to open the page or object in your default browser. Point to the hyperlink to display the URL or path as a tooltip.
Description
Specifies the descriptive text associated with the hyperlink.
URL
Specifies the web address or local file name associated with the hyperlink. The URL must include the protocol, such as http: or https:, as well as the domain name. For example, https://hexagonppm.com/.
Is Named by Rule
Specifies whether the object name is determined by a rule.
Is Twisted
Specifies whether the object is twisted or not twisted.
Landing Curve Projection Method
Specifies how the software locates the landing curve with respect to the parent plate system thickness. The list is defined by the ShipStructLandingCurveProjectionMethod codelist
Along Web indicates that Smart 3Dx projects the landing curve in-line with the profile web.
Normal indicates that Smart 3Dx projects the landing curve normal to the plate surface.
Last Modified by
Specifies the name of the person who last modified the object.
List Index
Specifies the style Smart 3Dx applies to the object. This value is dependent upon the color you have chosen in the graphic view.
Load Point
Specifies the cross-section load point through which the landing curve passes.
Name
Specifies the name of the selected object. If the name is too long to entirely display in the box, point to the box to display the complete name as a tool tip. If the name is not defined by a rule, User Defined displays. If this name is generated by a naming rule, Naming Rule displays. If you type a name in this box, Smart 3Dx automatically changes the naming rule to User Defined.
Mounting Face
Specifies the cross-section face to mount to the plate system. The options vary depending on the profile cross-section.
Naming Category
Specifies the naming category. The naming rule uses the category in naming the profile part that is a child to the profile system.
Naming Rule Prog ID
Specifies the Prog ID associated with the naming rule.
Orientation
Specifies the orientation of the edge reinforcement.
Override Flag
Specifies whether the symmetry flag set by the board management service has been manually overwritten by the user.
Parent System
Specifies the parent system for the object. Recently used systems that are appropriate to assign as the parent system for this object display in the list along with the Select from Workspace and Select from Model options. The most recently used system displays at the top.
The parent system of the object must have an Approval Status of Working before you can change the Parent System value. If the Approval Status of the parent system is not set to Working, this value is read-only.
Select Interactively
Turns on or off the interactive selection. When this option is on, you can select the parent object in a graphic view or any of the explorers.
Select from Workspace
Displays the Select Parent System Dialog with the Workspace tab open. The workspace is the subset of the active model database you specified when you started your design session. Navigate the hierarchy to select the parent system, and then click OK.
Select from Model
Displays the Select Parent System Dialog with the Model tab open. The model is all of the objects in the active model database, including those that are not part of your workspace. Navigate the hierarchy to select the parent system, and then click OK.
Part Geometry State
Specifies whether the part is detailed.
Profile Length
Specifies the length of the object.
Profile Type
Specifies the profile type of the part. The list is defined by the StrMfgProfileType codelist.
Slot Connectivity
Specifies the minimum welding requirement at profile and slot intersections to meet the build method requirements. The list contains all available values as defined in the reference data, typically None, Webleft, Webright, Double, N/A, and Default. The list is defined by the SlotConnectivityData codelist.
Start Connection Type
Specifies the connection type associated with the beginning of the object.
Symmetry
Specifies the symmetry value for the part. The symmetry value is determined by Tools > Board Management Service in Structural Detailing.
Web Thickness Offset
Specifies the offset direction along the plate face.
Web Thickness Orientation
This property is not used.
Wet Center of Gravity
Specifies the location of the wet center-of-gravity for the object.