Modify
Placement Type
Displays all the placement types. The components listed in each placement type are based on the piping specification and nominal diameter of the object selected along with the geometry at the insertion location. By default, Specification is selected in the Placement Type box.
Specification
Places components based on what is defined in the piping specification.
Instruments
Currently not implemented.
Specialties
Currently not implemented.
Catalog Tags
Currently not implemented.
Design Basis Tags
Currently not implemented.
Short Code
Specifies the short code associated with the object.
Option Code
Displays the option for the selected component. In addition, the Option list contains any options defined in the piping specification for the selected short code. Selecting a value from the Option list updates the objects.
Position and Orientation
Rotation Angle
Specifies the rotation angle about the pipe or axis for the component.
Operator Angle
Specifies the angle to rotate the valve operator about the valve stem. This angle does not affect the valve body. You can view this option only when you select Butterfly Valve or Gate Valve in the Short Code list.
Move and Rotate
Move
Moves the selected object.
Move From
Specifies the point from which to start the move.
Move To
Specifies the point at which to finish the move.
Rotate
Rotates the selected component.
Angle Step
Specifies the angle about the axis that the object rotates when you select Step Rotation 
. Enter a value in the Angle Step box, or select a blank space in the control panel to remove the input focus from
the box.
Press G to set the focus to the active graphic view.
Press CTRL+LEFT to rotate the object clockwise one step about the Axis.
Press CTRL+SHIFT+LEFT to rotate the object counter-clockwise one step about the Axis.
Step Rotation
Rotates the object corresponding to the defined angle one step about the active axis. This control is not available if Angle Step is undefined or is set to zero.
Select a blank space in the control panel to remove the input focus, and then press G to set the focus to the active graphic view.
Press SHIFT to rotate the object counter-clockwise.
Run
Displays options for creating and selecting pipe runs.
Select
Specifies a parent run from the graphic view or from the System Hierarchy Explorer. You can also select recently used runs from the Select Run list.
Select from P&ID
Currently not implemented.
New Pipe Run
Displays the Pipe Run Controls. Use this option to create a new pipe run.
More
Displays the Select Run Dialog. Use this option to select a pipe run that is associated with a different pipeline.
Select Run
Displays recently selected pipe runs from which you can select a pipe run.
Run Parent
Displays the name of the parent pipeline. Hover over this field for a tooltip that displays the entire system path.
Completion
Cancel (ESC)
Cancels all changes and exits the command.
Finish (CTRL + ENTER)
Saves all changes and exits the command.
Finish and Modify (CTRL + SHIFT + ENTER)
Saves all changes, and then selects the objects for modification.