Appendix: Upgrading Your Tool Schema - Intergraph Smart 3D - Installation & Upgrade

Intergraph Smart 3D Upgrade Guide

Language
English
Product
Intergraph Smart 3D
Subproduct
Upgrade Guide
Search by Category
Installation & Upgrade
Smart 3D Version
13.1

This section describes the process to upgrade your Tool Schema files on the SharedContent (Symbols) share for environments integrated with SmartPlant Foundation and HxGN SDx. These steps should be done after the upgrade to 13.1 is complete.

Steps for an environment integrated with SmartPlant Foundation are outlined below:

  1. Ensure that the files in the XML folder in the SharedContent (Symbols) share are writeable as these files will be upgraded from 2018, 2019, or 13 to 13.1.

  2. For SmartPlant Foundation integrated environments, run the SmartPlant > Upgrade Schema command from the Project Management task.

  3. If in an integrated Global Workshare environment, copy the following files from the Host location’s SharedContent (Symbols) share to the same location on each satellite’s SharedContent (Symbols) share:

    1. If Plant Model Type [SharedContent]\XML\SP3D_FILES\SP3DPublishMap.xml

    2. If Marine Model Type [SharedContent]\XML\SM3D_FILES\SP3DPublishMap.xml

    3. [SharedContent]\XML\P3DComponent.xml

    4. [SharedContent]\XML\DesignBasis_Map.xml

Steps for an environment integrated with HxGN SDx are outlined below:

  1. SIOMap.xml and SIOSchema.xml files under [SharedContent]\XML should be writeable.

  2. Typically, integration schema and map files (SIOMap.xml and SIOSchema.xml) are automatically upgraded when you use the Upgrade Version Command to upgrade the catalog database from a previous version of the software to the current version. If the automatic upgrade fails for any reason or if you need to upgrade the integration schema and map files outside of the standard catalog upgrade for HxGN SDx integrated environments, run the Integration > Upgrade Integration Schema Command from the Project Management task. All customizations made in prior software versions will be retained whether the files are upgraded during database upgrade or by running the command manually.

  3. If in an integrated Global Workshare environment, copy the following files from the Host locations SharedContent (Symbols) share to the same location on each satellite’s SharedContent (Symbols) share:

    1. [SharedContent]\XML\SIOMap.xml

    2. [SharedContent]\XML\SIOSchema.xml