Sets options for modifying an arc that is part of an existing path. This ribbon appears when you select an arc in the existing path.
Properties
Displays the Sketch Properties dialog, in which you can view properties for the path.
Finish
Displays the path in the active view and returns control to the Place Handrails Command or Place Slabs Command .
Cancel
Cancels the path placement, closes the ribbon, and returns control the activating command.
Show Cross Section View
Opens a new graphics window that is oriented normal to the sketch plane.
Edit
Allows you to modify and move the existing path. You can select the segment, turn, or multiple segments to which you want to make modifications.
Create
Displays the Create Path ribbon bar to allow you to add segments to an existing path. You cannot add segments to slab boundary paths.
First Point
Specifies that you are selecting the starting location of the move vector.
Second Point
Specifies that you are selecting the ending location of the move vector.
Path Type
Specifies the type of line for the current segment in the path. To change the segment type, click a new type in the Path Type list. You can select from the following line types:
Line
Defines the line type for the segment to be a straight line.
Arc by 3 Points
Defines the line type for the segment to be an arc. To define the arc, you must click three points in the view.
No Line
This option is not available for handrails.
Plane
Activates options for selecting a working plane for the path. This option is disabled if you are editing a path for slab boundaries. Six options are available:
Plan Plane
Defines the work surface as the XY plane at the depth of the active end. You also can press 1 to select this option.
Elevation Plane: East-West
Defines the work surface as the XZ plane. You also can press 2 to select this option.
Elevation Plane: North-South
Defines the work surface as the YZ plane. You also can press 3 to select this option.
Plane by Turn
Defines the work surface as the plane defined by an existing turn. You select the turn to set the plane. You also can press 4 to select this option.
Plane by Three Points
Defines the work surface using three points that you define. You also can press 5 to select this option.
No Plane
Clears any work surfaces. The software does not project points that you place to any plane. You also can press 6 to select this option.
Delete Selected Items
Deletes the selected path segments.