Place an in-line can on cross bracing - Intergraph Smart 3D - Help

Intergraph Smart 3D Structure

Language
English
Product
Intergraph Smart 3D
Subproduct
Structure
Search by Category
Help
Smart 3D Version
11 (2016)
  1. Click Place Splits Command on the vertical toolbar.

  2. In the Place box, select By Object.

  3. In the Split Status box, select Split First.

  4. Select the cross brace to split.

    Place an inline can on cross bracing STEP SELECT SPLIT

  5. Click Accept .

  6. Select the other cross brace.

    Place an inline can on cross bracing STEP SPLITTER

  7. Click Finish.

  8. Click Place Can Command SP3D STRUCT Place Can ICON to display the Place Can Ribbon.

  9. From the Catalog browser or from Can Type on the ribbon, select the in-line can rule to place from the Catalog.

    SHARED Tip Select one of the Custom Inline Can types to change individual can parameters.

  10. Select the cross brace you selected in step 6 (the cross brace that you did not split) near the intersection of the two cross braces.

    Place an inline can on cross bracing STEP CAN MEMBER

    The software prompts you to select the transverse members.

  11. Select the cross brace that you split (the cross brace you selected in step 4).

    Place an inline can on cross bracing STEP SELECT TRANS

  12. Click Accept .

  13. If you are placing a Custom Inline Can type, change the diameter, thickness, computation method, factor, and cone parameters on the ribbon to meet your needs. If you are placing a predefined can from the Catalog, these settings are read-only.

  14. Click Finish.

    Place an inline can on cross bracing STEP FINISHED