Section Tab (Wall System Properties Dialog) - Intergraph Smart 3D - Help - Hexagon

Intergraph Smart 3D Structure

Language
English
Product
Intergraph Smart 3D
Subproduct
Structure
Search by Category
Help
Smart 3D Version
13

Displays the properties for the wall's cross-section. The property name appears on the left side of the grid and the corresponding property value appears on the right side of the grid. If you selected more than one wall and then selected the properties command, only the common properties between the selected walls display.

When viewing properties for a single wall, the following properties display. More properties may display depending on what you defined in the reference data. Refer to the Structure Reference Data Help for more information on properties.

Category

Specifies the properties category to view. Select Standard.

Standard

The standard properties that display depend on the reference data for the wall. Because wall reference data is fully customizable, only the common properties are documented.

Wall Cross Sections Name

Specifies the name of the wall cross-section.

Position

Specifies the relative position of the wall to the path. Fifteen positions are available. The location of positions 10 (center-of-gravity) and 15 (shear center) depend on the wall's section shape. The local z- axis of the wall and the center-of-gravity point of the section define positions 11 and 14. The local y-axis of the wall and the center-of-gravity point of the section define positions 12 and 13.

Horizontal Offset

Specifies the horizontal offset between the object and the object's selected Position location.

Vertical Offset

Specifies the vertical offset between the object and the object's selected Position location.

Thickness

Type the thickness of the wall.

Height

Specifies the height of the wall.

Reflect

Reflects or mirrors the cross-section about the wall's path. This parameter affects both symmetric and asymmetric sections.

Angle

Enter the angle of the wall from vertical. You can enter both positive and negative angles.

CentroidX

Type the horizontal distance from the designated member edge to the centroidal axis.

CentroidY

Type the vertical distance from the designated member edge to the centroidal axis.

Moment of Inertia about X (Ixx)

Type the moment of inertia for the section's local x-axis.

Moment of Inertia about Y (Iyy)

Type the moment of inertia for the section's local y-axis.

Plastic Section Modulus for X (Zxx)

Type the plastic section modulus for the section's local x-axis.

Elastic Section Modulus about X (Sxx)

Type the section modulus for the section's local x-axis.

Radius of Gyration about the X-axis (Rxx)

Type the radius of gyration for the section's local x-axis.

Plastic Section Modulus about Y (Zyy)

Type the plastic section modulus for the section's local y-axis.

Elastic Section Modulus about Y (Syy)

Type the section modulus for the section's local y-axis.

Radius of Gyration about the Y-axis (Ryy)

Type the radius of gyration for the section's local y-axis.

Torsional Moment of Inertia (J)

Type the torsional moment of inertia for the section.

Warping Constant (Cw)

Type the warping constant for the section.

Polar Radius of Gyration about the Shear Center (ro)

Type the polar radius of gyration about the shear center.

Flexural Constant (H)

Type the flexural constant for the section.