Creates the manual marking lines on plate parts, profile parts, members, and pin jigs. Marking lines are used to assist the construction processes.
Marking Line Types
Location
The trace curve of plate, profile, collar plate, and bracket. These marking lines are created automatically. They are applied to flat plate, curved plate, flat profile, curved profile, template, jigs and remarking objects.
End connection
The cross section stamp on a plate or profile. These marking lines are created automatically. They are applied to flat plate, curved plate, flat profile, and curved profile objects.
Lap connection
These marking lines are created automatically. They are applied to flat plate, curved plate, flat profile, and curved profile objects.
Tab and bridge
A marking for the final cut. These marking lines are created automatically. They are applied to flat plate and curved plate objects.
Template line
Template positions on a plate. These marking lines are created automatically. They are applied to curved plate objects.
Roll boundaries
Roll lines showing roll range with radius and direction information. These marking lines can be created automatically or manually. They are applied to curved plates and curved profile objects.
Flat of bottom, flat of side, and other hull knuckle lines
Delivered by the naval architecture software through the Molded Forms task. These marking lines can be created automatically or manually. They are applied to curved plates and template objects.
Knuckle line
Handles corrugated plates. These marking lines can be created automatically or manually. They are applied to curved plate and curved profile objects.
Ship direction
These marking lines can be created automatically or manually. They are applied to flat plate, curved plate, flat profile, curved profile, template, jig and remarking objects.
Labels
All labels. These marking lines are created automatically. They are applied to flat plate, curved plate, flat profile, curved profile, and template objects.
Fitting - plate to plate - butt joint
Line across two coplanar plates. These marking lines can be created automatically with arguments or manually. They are applied to flat plate and curved plate objects.
Fitting - plate to plate - tee joint
Short fitting lines on both plates on the joint edge. These marking lines can be created automatically with arguments or manually. They are applied to flat plate and curved plate objects.
Fitting - profile to plate - penetration
A pair of lines on the plate indicating the top of the profile. These marking lines can be created automatically with arguments or manually. They are applied to flat plate and curved plate objects.
Fitting - profile to plate
Short fitting lines on both plates on the joint edge. These marking lines are created automatically with arguments. They are applied to flat plate, curved plate, flat profile, and curved profile objects.
Seam control
A pair of lines parallel to the seam in defined distance to check accuracy of a connection. These marking lines can be created automatically with arguments or manually. They are applied to flat plate, curved plate, flat profile, and curved profile objects.
Hole
Includes air and drain holes. These marking lines are created automatically with arguments. They are applied to flat plate, curved plate, flat profile, and curved profile objects.
Reference plane lines
Waterlines, frames, and buttock lines. These marking lines are created automatically with arguments. They are applied to flat plate, curved plate, flat profile, curved profile, and template objects.
Roll lines
Roll lines for shell rolling. These marking lines can be created automatically with arguments or manually. They are applied to curved plate objects.
Web frames check lines
Used for checking the accuracy of web frames cut out of plates. These marking lines are created automatically with arguments. They are applied to curved plate objects.
Bending control lines
Lines for checking bending of the cylindrical or conical shapes, such as hawse pipe. These marking lines are created automatically with arguments. They are applied to curved plate and curved profile objects.
Inverse bending line
These marking lines are created automatically with arguments. They are applied to curved profile objects.
Base control line
Marked on the template and shell plate. These marking lines are created automatically with arguments. They are applied to curved plate and template objects.
Site line
Marked on the template. These marking lines are created automatically with arguments. They are applied to template objects.
Plate edge check lines
Used for checking the accuracy of plates in fabrication and assemblies. These marking lines are created automatically with arguments. They are applied to flat plate and curved plate objects.
Block Mark
Reference line for all block panels. These marking lines are created manually. They are applied to flat plate, curved plate, flat profile, and curved profile objects.
Painting line
Only for shell plate. Border between different colors. These marking lines are created manually. They are applied to flat plate and curved plate objects.
Robot mark
Robot positioning mark. These marking lines are created manually. They are applied to flat plate and curved plate objects.
Name Mark
Text that needs to be projected on a plate. These marking lines are created manually. They are applied to flat plate and curved plate objects.
User defined marking line
These marking lines are created manually. They are applied to flat plate, curved plate, flat profile, curved profile, template, and jig and remarking objects.
Margin
Assigned margin. These marking lines are created automatically. They are applied to flat plate, curved plate, flat profile, and curved profile objects.
Pin jig diagonal
Mapped to the individual part. These marking lines are created manually. They are applied to jig and remarking objects.
Diagonal
From the pin jig. In the case of a profile, it is a fitting mark on the profile. These marking lines are created automatically. They are applied to flat plate, curved plate, flat profile, curved profile, template, and jig and remarking objects.
Pin jig remarking additional
Mapped to the individual part. These marking lines are created manually. They are applied to jig and remarking objects.
Remarking additional
From the pin jig. In the case of a profile, it is a fitting mark on the profile. These marking lines are created automatically. They are applied to flat plate, curved plate, flat profile, and curved profile objects.
What do you want to do?