When you select multiple objects, you can change the properties that those objects have in common. If the value of the property is the same for the objects that you have selected, that value displays in the ribbon bar. If the values are different, the box for that value is blank. Changing the value of a property makes that the value for all of the selected objects.
User Answers
Select a template process type from the list. This list is the same as the Process list on the Template ribbon.
Parameter
Displays the parameters for the process that you have selected.
Value
You can modify the parameter values if necessary.
Rule-Based
If the value of the parameter is rule-based, a check box displays. You can clear the check box and then select a different parameter value if necessary.
Catalog Value
Displays the original catalog value for the process if you modified the value.
Type
Specifies the type of the template. Template types include:
-
frame
-
perpendicular
-
user defined
-
aft forward
-
even
Side
Specifies the side on which the template set is applied.
Orientation
Specifies the orientation for the template. Template orientations include:
-
along frame
-
perpendicular
-
normal to base plane
Min Height
Specifies the minimum height of the template.
Max Height
Specifies the maximum height of the template.
Position
Specifies the positions at which templates must be placed. This could be at Frames, at Even Distance, or at Edges.
Extension
Specifies the extension for the template. Extensions include:
BothSidesFixed
Creates a template on both sides of the base control line and extends that template on both sides with a fixed value.
BothSidesNo
Creates a template on both sides of the base control line with no extension.
BothSidesOffset
Creates a template on both sides with an extension based on the offset.
LowerSideFixed
Creates a template with a fixed extension only on the lower side of the base control line.
LowerSideOffset
Creates a template with an offset-based extension only on the lower side of the base control line.
LowerSideNo
Creates a template with no extension only on the lower side of the base control line.
UpperSideFixed
Creates a template with a fixed extension only on the upper side of the base control line.
UpperSideOffset
Creates a template with an offset extension only on the upper side of the base control line.
UpperSideNo
Creates a template with no extension only on the upper side of the base control line.
Template Service
Creates template profiles.