When you select multiple objects, you can change the properties that those objects have in common. If the value of the property is the same for the objects that you have selected, that value displays in the ribbon bar. If the values are different, the box for that value is blank. Changing the value of a property makes that the value for all of the selected objects.
User Answers
Select a template process type from the list. This list is the same as the Process list on the Template ribbon.
Parameter
Displays the parameters for the process that you have selected.
Value
You can modify the parameter values if necessary.
Rule-Based
If the value of the parameter is rule-based, a check box displays. You can clear the check box and then select a different parameter value if necessary.
Catalog Value
Displays the original catalog value for the process if you modified the value.
Min Height
Specifies the minimum height of the base plane from the end cut. Available options include:
-
Fixed
-
Height_50
-
Height_100
-
Height_150
-
Height_200
Max Height
Specifies the maximum height of the base plane from the end cut.
Extension
Specifies the extension to apply on the bottom line. Available options include:
-
ExtnRad90
-
ExtnLinear100
-
ExtnAlongEdge50
-
Ignore
Side
Specifies the side on which the template set is applied.
-
Outer
-
Inner
SideEnd
Specifies the tube end on which the template set is applied. Available options include:
-
Base
-
Offset
Type
Specifies the template type based on the base control line position. Template types include:
-
ShortDistance BCL
-
LongDistanceBCL
-
ModelOrigin
-
Global X Max
-
Global X Min
-
Global Y Max
-
Global Y Min
-
Global Z Max
-
Global Z Min
Base Plane
Specifies the base plane option. Base plane options include:
-
BySystem
-
NormalToAxis
-
Global
-
User defined
Template Service
Specifies the rule that computes the base plane, base control line, and template contours.
UserDefinedValues
Specifies the rule the returns any user-defined values.
TemplateNaming
Specifies the rule the computes the template name.
Bevel
Specifies the rule the computes the bevel.