General Tab (Manufacturing Tab Properties Dialog) - Intergraph Smart 3D - Help - Hexagon

Intergraph Smart 3D Structural Manufacturing

Language
English
Product
Intergraph Smart 3D
Subproduct
Structural Manufacturing
Search by Category
Help
Smart 3D Version
13

Standard

Name

Specifies the name of the manufacturing tab.

Name Rule

Select the naming rule to use to name the manufacturing tab.

DefaultNameRule

Enables the software to automatically name new objects. For a manufacturing tab, the following syntax is used: <"Mfg Tab">-<Workshare Location ID>. For example, "Mfg Tab-1".

User Defined

Requires you to type a name in the Name box.

Part Item

Indicates the name of the catalog part used to create the tab. This property is read only.

Detailed Part Status

Indicates the status of the detailed part. This property is read only.

Manufacturing Object Status

Indicates the status of the manufacturing object. This property is read only.

Production

Bevel on Tab Contour

Specifies the bevel status on the outer contour created by the Manufacturing Tab command.

Ignore

The bevel is not applied.

Driven

The bevel is applied to the portion of the contour touching the driven edge.

Driving

The bevel is applied to the portion of the contour touching the driving edge.

Both

The bevel is applied to the portion of the contour touching either the driven or driving edges.

Bevel on Tab Mark

Specifies the bevel status on the marking between the plate and the tab.

Ignore

The bevel is not applied.

Apply

The bevel is applied along the marking.