Manufacturing plate marking sets are rule-based and can be customized by facility.
When you select multiple objects, you can change the properties that those objects have in common. If the value of the property is the same for the objects that you have selected, that value displays in the ribbon bar. If the values are different, the box for that value is blank. Changing the value of a property makes that the value for all of the selected objects.
User Answers
Select a manufacturing plate marking set from the list. This list is the same as the Marking Set list on the manufacturing plate ribbon.
Parameter
Displays the parameters for the marking set that you have selected.
Value
You can modify the marking values if necessary.
Rule-Based
If the value of the marking set is rule-based, a check box displays. Clear the check box and then select a different marking value if necessary.
Catalog Value
If you modified the value, the original catalog value for the marking displays.
The following marking processes are considered to be included in the marking lists. This marking list is fixed and uses the codelist proposal of Yes/No values.
The rules for marking lines, and the symbols they place, are customizable. For example, you can customize the marking line rules to place marking lines at the left, right, or center of the connected part.
Marking Type |
Comments |
---|---|
Plate Location |
System generated parameter. This parameter marks the locations of the bounded plates. |
Profile Location |
System generated parameter. This parameter marks the location of stiffening profiles. |
Collar Location |
System generated parameter. This parameter marks the location of connected collar plates. |
Bracket Location |
System generated parameter. This parameter marks the location of connected bracket plates. |
Lap Connection |
System generated parameter. This parameter marks the location of lap connected plates. |
End Connection |
System generated parameter. This parameter marks the locations of end connected profiles. |
Fitting Plate to Plate T Joint |
Shipyards need to control the number of symbols, symbol type, and its parameters. Used for accuracy control when positioning connected parts. |
Fitting Plate to Profile Penetration |
Shipyards need to control the number of symbols, symbol type, and its parameters. Used for accuracy control when positioning connected parts. |
Fitting Plate to Profile |
Shipyards need to control the number of symbols, symbol type, and its parameters. Used for accuracy control when positioning connected parts. |
Reference Planes Frame |
System generated parameter. Displays the intersection of the plate and X-planes within the range of the plate. |
Reference Planes WaterLine |
System generated parameter. Displays the intersection of the plate and Y-planes within the range of the plate. |
Reference Planes Buttock |
System generated parameter. Displays the intersection of the plate and Z-planes within the range of the plate. |
Block Control |
User marking. Displays marks for accuracy control. |
Seam Control |
User marking. Displays marks for accuracy control. |
Template Location Lines |
System generated parameter. Marks the locations of templates. |
Base Control Line |
System generated parameter. Marks the location of template base control lines. |
Roll Lines |
System generated parameter. Marks the roll on a curved plate. |
Knuckle Lines |
System generated parameter. Marks the location of a knuckle. |
Naval Architect Lines |
System generated parameter. Marks the naval architect lines, such as flat-of-side or flat-of-bottom. |
Roll Boundaries |
System generated parameter. Marks the start and end of a roll on a curved plate. |
Ship Direction |
System generated parameter. Tick marks showing the global orientation of the plate. |
Diagonals |
System generated parameter. Displays the diagonals of the plate. |
Robot Mark |
System generated parameter. Displays robot marks generated with the User defined marking line option of the Marking command. |
Painting Line |
System generated parameter. Displays painting lines generated with the User defined marking line option of the Marking command. |
Mark (ship name) |
User marking. Marks the ship name of the plate. |
Plate Edge Check Lines |
System generated parameter. Displays marks near the plate edge for accuracy control. |
Web Frames Check Lines |
System generated parameter. Displays marks near the plate edge connected to the hull for accuracy control. |
Bridge |
This parameter is not currently used. |
Feature Tab |
This parameter is not currently used. |
Welding Tab |
This parameter is not currently used. |
Bending Control Line |
System generated parameter. Displays the bending control lines generated in the unfold process. |
Margin |
System generated parameter. Displays the pre-margin contour. For a negative margin, this lies outside the final plate contour and is not marked. |
User Defined |
User marking. Displays user-defined markings. |