Tubular Member Template Ribbon - Intergraph Smart 3D - Help - Hexagon

Intergraph Smart 3D Structural Manufacturing

Language
English
Product
Intergraph Smart 3D
Subproduct
Structural Manufacturing
Search by Category
Help
Smart 3D Version
13.1

Displays the controls used to add tube templates to the model.

Properties ICON Properties

Opens the Tube and Edge Templates Properties Dialog, which you use to view and modify the properties, including process and marking properties, of the template that you are about to place in the model.

Tubular Member Parts

Select the tubular member part to which you want to add the template. You can select the part in a graphic view or in the Workspace Explorer.

Base Plane

Select the base plane for the template. The base plane is an offset balance plane based on the tube axis. The base plane can be perpendicular to the tube axis, or it can be along one of the global axes.

Base Plane

  • By System

  • NormalToAxis

  • Global

  • UserDefined

Side

  • Outer

  • Inner

Side End

  • Base

  • Offset

Process List

  • Default_TemplateProcessTube

  • ShortDistBCL_TemplateProcessTube

  • LongDistBCL_TemplateProcessTube

Marking List

  • Default_TemplateMarkingTube

Base Control Line

Currently, this step is not supported. It overrides the automatically generated base control line and starts Sketch2D so that you can draw the base control line. The base control line controls the position on the 3D tube template where the tube is opened to unfold. The tube opens at the opposite position to the base control line and the 2D tube template output is generated by unfolding the 3D tube template.

Finish

Displays a dialog asking if you want to accept or reject the changes. If you click Accept, the software displays a preview of the template set. This action creates the template using the parameters that you have defined.

Cancel

Clears the selection.

Accept

Accepts the selection.

Process List

Select a template process from the list. A process is a rule-based geometrical definition of a template based on particular manufacturing information. For example, template spacing is a process.

  • Default_TemplateProcessTube

  • ShortDistBCL_TemplateProcessTube

  • LongDistBCL_TemplateProcessTube

Marking List

Select a process from the list.

  • Default_TemplateMarkingTube