When you select multiple objects, you can change the properties that those objects have in common. If the value of the property is the same for the objects that you have selected, that value displays in the ribbon bar. If the values are different, the box for that value is blank. Changing the value of a property will make that the value for all of the selected objects.
User Answers
Selects a template process type from the list. This list is the same as the Process list on the Template ribbon.
Parameter
Displays the parameters for the process that you have selected.
Value
You can modify the parameter values if necessary.
Rule-Based
If the value of the parameter is rule-based, a check box displays. You can clear the check box and then select a different parameter value if necessary.
Catalog Value
Displays the original catalog value for the process if you modified the value.
SideMark
For future use.
SeamMarks
Creates marks at seam locations at both ends of each template.
BaseCtlLineMark
Creates a mark on the top line of the template at some distance from the top base control line.
ShipDirectionMark
Creates a mark indicating the ship direction.
LabelMark
For future use.
FrameMarks
Creates marks of intersecting frames.
KnuckleMarks
Creates marks of intersecting knuckles with the template bottom line.
ReferenceMarks
Creates marks of intersecting reference curves with the template bottom line.
TemplateMarks
Creates marks of intersecting templates with the template.
CustomMarks
Creates any other marks based on rule.