Adds NestingData attributes to the SMS_PART_INFO element. The software creates the SMS_NESTDATA node is cr SMS_PART_INFO, and exports the attributes. The INTERFACE attribute describes the attributes to report.
NAME
Adds any attribute that the INTERFACE attribute describes:
-
SMS_PART_INFO||SMS_NESTDATA||LOT_NUMBER
-
SMS_PART_INFO||SMS_NESTDATA||LOT_DATE
ACTION
Action |
Description |
NESTING_DATA |
Uses NestingData to get attributes. |
INTERFACE
Format |
Description |
Interface::Attribute |
Gets the attribute value from the interface on the assembly or block. If the attribute value is a codelist, the software displays the short description. |
VALUE
Specifies an optional default value of your choice. Smart 3D uses this value if an error occurs while retrieving the value from the INTERFACE attribute. If this attribute is not used, then the system uses “” as the default value.
Smart 3D ignores all other attributes.
Examples
< S3DPROPERTY NAME="SMS_PART_INFO||SMS_NESTDATA||LOT_NUMBER ACTION="NESTING_DATA" INTERFACE="IJMfgNestData::LotNumber"/>
-OR-
< S3DPROPERTY NAME="SMS_PART_INFO||SMS_NESTDATA||LOT_NUMBER ACTION="NESTING_DATA" INTERFACE="IJMfgNestData::LotNumber" VALUE=”NULL”/>
< S3DPROPERTY NAME="SMS_PART_INFO||SMS_NESTDATA||NESTING_DATE ACTION="NESTING_DATA" INTERFACE="IJMfgNestData::NestingTimestamp"/>
-OR-
< S3DPROPERTY NAME="SMS_PART_INFO||SMS_NESTDATA||NESTING_DATE ACTION="NESTING_DATA" INTERFACE="IJMfgNestData::NestingTimestamp" VALUE="NULL"/>
Sample Output
The sample was generated for the SMS_NESTDATA:
Example with BuiltUp: SMS_NESTDATA is created for each Web and Top Flange