Modify Profile Straking Seam Ribbon - Intergraph Smart 3D - Help

Intergraph Smart 3D Structural Detailing

Language
English
Product
Intergraph Smart 3D
Subproduct
Structural Detailing
Search by Category
Help
Smart 3D Version
12.1 (2019)

Displays the options that you use to modify a straking seam.

 Properties

Opens the Profile Straking Seam Properties Dialog, which you can use to edit properties for the seam.

 Profile System

Specifies the profile system or the plate system that has associated profile systems upon which to place a straking seam. The seams are placed on the child detailed parts of the profile systems. You can select stiffener profile systems or linear beam profile systems.

 References

Specifies objects that intersect the detailed profile part at which to place the seam. Objects that you can select as references include: reference curves, reference planes, plate systems, edge reinforcement systems, seams (design, planning, and straking), profile systems (landing curve), and edge ports including openings.

Finish

Modifies the seam using the parameters that you have defined.

 Cancel

Rejects the selected objects.

 Accept

Accepts the selected objects and advances the command to the next step.

Offset Method

Specifies the offset method, if needed.

Offset Value

Specifies the offset value. You can indicate the direction of the offset by typing a plus (+) or minus (-) sign in front of the offset value. A positive value is offset in the positive direction of the closest main coordinate system axis.