Place Manual Chamfer Ribbon - Intergraph Smart 3D - Help

Intergraph Smart 3D Structural Detailing

Language
English
Product
Intergraph Smart 3D
Subproduct
Structural Detailing
Search by Category
Help
Smart 3D Version
11 (2016)

Controls options for placing a chamfer between two detailed part ports. The parts do not have to be connected.

Properties

Displays the Chamfer Properties Dialog, which you use to view and modify the properties of the chamferbefore it is written to the database.

Chamfer Method

Displays images corresponding to supported methods for creating a manual chamfer.

Bounded Plate Chamfer

Initiates chamfer creation by selecting part, part face, and face of another part that overlaps the port of the parent part.

Unbounded Plate Chamfer

Initiates chamfer creation by selecting part and face.

Edge Reinforcement Chamfer

Initiates chamfer selection by selecting an edge reinforcement part and face.

Indirect Plate Chamfer

Initiates chamfer creation by selecting part, part face, and face of another part that does not overlap the port of the parent part.

Select Parent Part

Select the part that contains the first port to use in creating the chamfer. This part is the parent of the chamfer.

Select Port to be connected from Parent Part

Specifies a port of the parent part. This port is used as the first input to the chamfer.

Select Other Port to connect to

Specifies a port of another part as a second input to the chamfer. This property is only available for the Bounded Plate Chamfer and Indirect Plate Chamfer methods.

Select Port on End Cut

Specifies a port on the Edge Reinforcement end cut of the chamfer.

Finish

Creates the chamfer.

Chamfer Class

Specifies the chamfer root class for the chamfer.

Chamfer Item

Specifies the chamfer.

Rule Based

Enables or disables the Chamfer Item list. Selecting this check box disables the Chamfer Item list.

Extension Type

Specifies the length options for a chamfer. Select Overlap, Full Edge, or Extend by Value.

Extension 1

Specifies the start of the extension length. This option is available only when Extend by Value is selected.

Extension 2

Specifies the end of the extension length. This option is available only when Extend by Value is selected.