Place equally spaced edge features - Intergraph Smart 3D - Help - Hexagon

Intergraph Smart 3D Structural Detailing

Language
English
Product
Intergraph Smart 3D
Subproduct
Structural Detailing
Search by Category
Help
Smart 3D Version
13.1
  1. Click Place Edge Features by Offset .

  2. Click Select Edge .

  3. Select the edge of the plate or profile part to which to add the edge features.

  4. Click Select Reference .

  5. Click Unlimited Case .

  6. Specify the number of edge features to place using the +ve or -ve Count boxes.

    If the reference does not naturally intersect the selected edge, either the +ve Count or the -ve Count is not supported depending on the orientation of the reference relative to the edge.

  7. Specify the distance between the edge features using the +ve or -ve Offset boxes.

    If the reference does not naturally intersect the selected edge, either the +ve Offset or the -ve Offset is not supported depending on the orientation of the reference relative to the edge.

  8. Select the distance calculation method from the Definition list.

  9. Specify whether to use the reference start point as the location for the first edge feature.

    The software does not support this option if the reference does not naturally intersect the selected edge.

  10. Select the Definition to specify how the software measures the offset distance from the reference. Options available are Along Girth, Vertical, Transverse, and Longitudinal. The software does not support Along Girth if the reference does not naturally intersect the selected edge.

  11. Click OK.

    You must clear Rule Based to select the edge feature shape.

  12. Select the edge feature shape from the Shape list.

  13. Click Finish.