MbrStdAC - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Structural Detailing Reference Data

Language
English (United States)
Product
Intergraph Smart 3D
Subproduct
Structural Detailing
Search by Category
Reference Data
Smart 3D Version
12 (2018)

Question

Type

Flip

BooleanCol (codelist)

Flip Primary and Secondary

BooleanCol (codelist)

Flip

Flips the location of asymmetrically applied features when the member is symmetrically bound.

FlipPrimaryandSecondary

Changes the end cuts from primary to secondary, and from secondary to primary. This applies in end-to-end cases in which you place an assembly connection.

Items

The naming convention for the items is a prefix that indicates primary usage with respect to the alignment of the bounded and bounding members followed by a sequential number. For example, F0001, FE0007, EE0003, and so on. The terms used to describe alignment are the same as those used for the existing question-and-answer-based assembly connections.

  • F = To Face

  • FE = To Face and Edge

  • EE = To Edge and Edge

  • EX = To Edge and Outside

  • FO = To Face and Outside

  • XX = To Outside and Outside

  • S = Collinear Seam

  • X = Special Case

  • OM = On Member

  • FX = Face and Outside

  • SN = Split None

Name

Description

Figure

E0001

This assembly connection places a sniped flange cut at the top, and a straight flange cut at the bottom. The web is cut along the bounding member, and required physical connections are created.

EE0001

This assembly connection places a straight flange cut at the top and bottom. It also places a corner feature (cope) at the top and bottom, and a snipe corner feature at the top face corner and bottom face corners.

EE0002

This assembly connection places a straight flange cut at the top and bottom. It also places a corner feature (face to outside) at the top and bottom.

EE0003

This assembly connection places a straight flange cut at the top and bottom. It also places a corner feature (cope) at the top and (rathole) at the bottom.

EE0004

This assembly connection places a straight flange cut at the top and bottom. It also places a corner feature (face to outside) at the top and (face to inside) bottom.

EE0005

This assembly connection places a straight flange cut and a corner feature (cope) at the top and bottom.

EE0006

This assembly connection places a straight flange cut and a corner feature (face to inside) at the top and bottom.

EE0007

This assembly connection places a straight flange cut at the top and bottom. It also places a corner feature (edge to outside) at the bottom.

EE0008

This assembly connection places a straight flange cut at the top and bottom. It also places a corner feature (face to outside) at the bottom, and a snipe corner feature at the top face corner.

EE0009

This assembly connection places a straight flange cut at the top and bottom.

EE0010

This assembly connection places a straight flange cut at the top and bottom. It also places a corner feature (Inside Face Rathole Std) at the top and (Inside Face Rathole Std) bottom.

EE1001

This assembly connection places a straight flange cut at the top and bottom. It also places corner features at the top face, bottom face, and inside edge.

EE1002

This assembly connection places a straight flange cut at the top and a snipe flange cut at the bottom. It also places corner features at the top face, bottom face, and inside edge.

EE1003

This assembly connection places a snipe flange cut at the top and bottom. It also places corner features at the top face, bottom face, and inside edge.

EE1004

This assembly connection places a snipe flange cut at the top and a straight flange cut at the bottom. It also places corner features at the top face, bottom face, and inside edge.

EX0001

This assembly connection places a straight flange cut at the top and bottom. It also places a corner feature (face to outside) at the top and (cope) bottom, and a snipe corner feature at the top face corner.

EX1001

This assembly connection places a straight flange cut at the top and bottom. It also places an outside web cut and corner features at the top face corner, the bottom face corner, and the inside edge.

EX1002, EX1003

This assembly connection places a straight flange cut at the top and bottom. It also places an outside web cut and corner features at the top face corner, the bottom face corner, and the inside edge.

EX1004

This assembly connection places a straight flange cut at the top and bottom. It also places an outside web cut and corner features at the top face corner, the bottom face corner, and the inside edge.

EX1005

This assembly connection places a snipe flange cut at the outside flange and a straight flange cut on the other flange. It also places an outside web cut and corner features at the top face corner, the bottom face corner, and the inside edge.

EX1006, EX1007

This assembly connection places a snipe flange cut at the outside flange and a straight flange cut on the other flange. It also places an outside web cut and corner features at the top face corner, the bottom face corner, and the inside edge.

EX1008

This assembly connection places a snipe flange cut at the outside flange and a straight flange cut on the other flange. It also places an outside web cut and corner features at the top face corner, the bottom face corner, and the inside edge.

EX1009

This assembly connection places a snipe flange cut at the outside flange and a straight flange cut on the other flange. It also places an outside web cut and corner features at the top face corner, the bottom face corner, and the inside edge.

EX1010, EX1011

This assembly connection places a snipe flange cut at the outside flange and a straight flange cut on the other flange. It also places an outside web cut and corner features at the top face corner, the bottom face corner, and the inside edge.

EX1012

This assembly connection places a snipe flange cut at the outside flange and a straight flange cut on the other flange. It also places an outside web cut and corner features at the top face corner, the bottom face corner, and the inside edge.

F0001

This assembly connection places a straight flange cut at the top and bottom.

F0002

This assembly connection places sniped setback flange cuts at the top and bottom.

F0003

This assembly connection places a straight flange cut at the top and a sniped setback at the bottom.

F0004

This assembly connection places a straight flange cut at the top and a sniped cut at the bottom.

F0005

This bearing plate assembly connection has a rectangular cross-section bearing plate with a particular value of radius and offset given for W-type cross-sections.

F0006

This bearing plate assembly connection has a circular cross-section bearing plate with a proper radius given for Circular type cross-sections.

F0007

This bearing plate assembly connection has a triangular cross-section bearing plate with a particular value of radius and offset given for L-type cross-sections.