MbrStdAC - Intergraph Smart 3D - Reference Data - Hexagon

Intergraph Smart 3D Structural Detailing Reference Data

Language
English
Product
Intergraph Smart 3D
Subproduct
Structural Detailing
Search by Category
Reference Data
Smart 3D Version
13.1

Question

Type

Flip

BooleanCol (codelist)

Flip Primary and Secondary

BooleanCol (codelist)

Flip

Flips the location of asymmetrically applied features when the member is symmetrically bound.

FlipPrimaryandSecondary

Changes the end cuts from primary to secondary, and from secondary to primary. This applies in end-to-end cases in which you place an assembly connection.

Items

The naming convention for the items is a prefix that indicates primary usage with respect to the alignment of the bounded and bounding members followed by a sequential number. For example, F0001, FE0007, EE0003, and so on. The terms used to describe alignment are the same as those used for the existing question-and-answer-based assembly connections.

  • F = To Face

  • FE = To Face and Edge

  • EE = To Edge and Edge

  • EX = To Edge and Outside

  • FO = To Face and Outside

  • XX = To Outside and Outside

  • S = Collinear Seam

  • X = Special Case

  • OM = On Member

  • FX = Face and Outside

  • SN = Split None

Name

Description

Figure

E0001

This assembly connection places a sniped flange cut at the top, and a straight flange cut at the bottom. The web is cut along the bounding member, and required physical connections are created.

E0001

EE0001

This assembly connection places a straight flange cut at the top and bottom. It also places a corner feature (cope) at the top and bottom, and a snipe corner feature at the top face corner and bottom face corners.

EE0002

This assembly connection places a straight flange cut at the top and bottom. It also places a corner feature (face to outside) at the top and bottom.

EE0003

This assembly connection places a straight flange cut at the top and bottom. It also places a corner feature (cope) at the top and (rathole) at the bottom.

EE0004

This assembly connection places a straight flange cut at the top and bottom. It also places a corner feature (face to outside) at the top and (face to inside) bottom.

EE0005

This assembly connection places a straight flange cut and a corner feature (cope) at the top and bottom.

EE0006

This assembly connection places a straight flange cut and a corner feature (face to inside) at the top and bottom.

EE0007

This assembly connection places a straight flange cut at the top and bottom. It also places a corner feature (edge to outside) at the bottom.

EE0007

EE0008

This assembly connection places a straight flange cut at the top and bottom. It also places a corner feature (face to outside) at the bottom, and a snipe corner feature at the top face corner.

EE0008

EE0009

This assembly connection places a straight flange cut at the top and bottom.

EE0010

This assembly connection places a straight flange cut at the top and bottom. It also places a corner feature (Inside Face Rathole Std) at the top and (Inside Face Rathole Std) bottom.

EE1001

This assembly connection places a straight flange cut at the top and bottom. It also places corner features at the top face, bottom face, and inside edge.

Edge and Edge_EE1001

EE1002

This assembly connection places a straight flange cut at the top and a snipe flange cut at the bottom. It also places corner features at the top face, bottom face, and inside edge.

Edge and Edge_EE1002

EE1003

This assembly connection places a snipe flange cut at the top and bottom. It also places corner features at the top face, bottom face, and inside edge.

Edge and Edge_EE1003

EE1004

This assembly connection places a snipe flange cut at the top and a straight flange cut at the bottom. It also places corner features at the top face, bottom face, and inside edge.

Edge and Edge_EE1004

EX0001

This assembly connection places a straight flange cut at the top and bottom. It also places a corner feature (face to outside) at the top and (cope) bottom, and a snipe corner feature at the top face corner.

EX1001

This assembly connection places a straight flange cut at the top and bottom. It also places an outside web cut and corner features at the top face corner, the bottom face corner, and the inside edge.

Edge and Outside_EX1001

EX1002, EX1003

This assembly connection places a straight flange cut at the top and bottom. It also places an outside web cut and corner features at the top face corner, the bottom face corner, and the inside edge.

Edge and Outside_EX1002_EX1003

EX1004

This assembly connection places a straight flange cut at the top and bottom. It also places an outside web cut and corner features at the top face corner, the bottom face corner, and the inside edge.

Edge and Outside_EX1004

EX1005

This assembly connection places a snipe flange cut at the outside flange and a straight flange cut on the other flange. It also places an outside web cut and corner features at the top face corner, the bottom face corner, and the inside edge.

Edge and Outside_EX1005

EX1006, EX1007

This assembly connection places a snipe flange cut at the outside flange and a straight flange cut on the other flange. It also places an outside web cut and corner features at the top face corner, the bottom face corner, and the inside edge.

Edge and Outside_EX1006 and EX1007

EX1008

This assembly connection places a snipe flange cut at the outside flange and a straight flange cut on the other flange. It also places an outside web cut and corner features at the top face corner, the bottom face corner, and the inside edge.

Edge and Outside_EX1008

EX1009

This assembly connection places a snipe flange cut at the outside flange and a straight flange cut on the other flange. It also places an outside web cut and corner features at the top face corner, the bottom face corner, and the inside edge.

Edge and Outside_EX1009

EX1010, EX1011

This assembly connection places a snipe flange cut at the outside flange and a straight flange cut on the other flange. It also places an outside web cut and corner features at the top face corner, the bottom face corner, and the inside edge.

Edge and Outside_EX1010_EX1011

EX1012

This assembly connection places a snipe flange cut at the outside flange and a straight flange cut on the other flange. It also places an outside web cut and corner features at the top face corner, the bottom face corner, and the inside edge.

Edge and Outside_EX1012

F0001

This assembly connection places a straight flange cut at the top and bottom.

F0002

This assembly connection places sniped setback flange cuts at the top and bottom.

F0003

This assembly connection places a straight flange cut at the top and a sniped setback at the bottom.

F0004

This assembly connection places a straight flange cut at the top and a sniped cut at the bottom.

F0005

This bearing plate assembly connection has a rectangular cross-section bearing plate with a particular value of radius and offset given for W-type cross-sections.

F0006

This bearing plate assembly connection has a circular cross-section bearing plate with a proper radius given for Circular type cross-sections.

F0007

This bearing plate assembly connection has a triangular cross-section bearing plate with a particular value of radius and offset given for L-type cross-sections.

F0008

This bearing plate assembly connection has a rectangular cross-section bearing plate and circular endings with a particular value of radius and offset given for flat bar type cross-sections

F0009

This assembly connection places a straight flange cut at the top and bottom.

F0010

This assembly connection places a slot on the bounding member and end cuts on the bounded member.

F0011

This assembly connection places only a slot on the bounding member.

This connection does not alter the length of the member system by applying an extension or setback to the member part. The dimension X in the graphic is determined by the placement of the bounding and bounded members.

F0014

This bearing plate assembly connection has a rectangular cross-section bearing plate with a specific radius and offset value.

F0014

F1001

This assembly connection places a straight flange cut at the top and bottom.

face_F1001

F1002

This assembly connection places a snipe flange cut at the top and bottom.

Face and Edge_FE1002

F1005

This assembly connection places a SnipeCutStd_WebcutPoint_R flange cut at the top and bottom.

face_F1005

F1006

This assembly connection places an OffsetSnipeCutStd_WebcutPoint_R flange cut at the top and bottom.

face_F1006

F1007

This assembly connection places an OffsetSnipeCutStd_Nose_WebcutPoint_R flange cut at the top and bottom.

face_F1007

FE0001

This assembly connection places a sniped setback flange cut at the bottom. It also places a straight flange cut and a corner feature (cope) at the top, and a snipe corner feature at the top face corner.

FE0002

This assembly connection places a sniped flange cut at the bottom. It also places a straight flange cut and a corner feature (face to outside) at the top.

FE0003

This assembly connection places a straight flange cut at the top and bottom. It also places a corner feature (cope) at the top and a snipe corner feature at the top face corner.

FE0004

This assembly connection places a straight flange cut at the top and bottom. It also places a corner feature (face to outside) at the top.

FE0005

This assembly connection places a sniped setback flange cut at the bottom. It also places a straight flange cut and a corner feature (rathole) at the top, and a snipe corner feature at the top face corner.

FE0006

This assembly connection places a sniped flange cut at the bottom. It also places a straight flange cut and a corner feature (face to inside) at the top.

FE0007

This assembly connection places a straight flange cut at the top and bottom. It also places a corner feature (rathole) at the top, and a snipe corner feature at the top face corner.

FE0008

This assembly connection places a straight flange cut at the top and bottom. It also places a corner feature (face to inside) at the top.

FE0009

This assembly connection places a straight flange cut at the top and bottom. It also places a corner feature (cope) at the top, and a snipe corner feature at the top face corner.

FE0010

This assembly connection places a sniped setback flange cut at the bottom and a straight flange cut at top, and a snipe corner feature at the top face corner.

FE0011

This assembly connection places a sniped setback flange cut at the bottom. It also places a straight flange cut and a corner feature (cope) at the top, and a snipe corner feature at the top face corner.

FE0012

This assembly connection places a straight flange cut at the top and bottom, and a snipe corner feature at the top face corner.

FE0013

This assembly connection places a sniped flange cut at the bottom. It also places a straight flange cut and a corner feature (cope) at the top, and a snipe corner feature at the top face corner.

FE1001

This assembly connection places a straight flange cut at the top and bottom. It also places corner features at the top face, bottom face, and inside edge.

Face and Edge_FE1001

FE1002

This assembly connection places a straight flange cut at the top and a snipe flange cut at the bottom. It also places corner features at the top face, bottom face, and inside edge.

Face and Edge_FE1002

FE1003

This assembly connection places a straight flange cut at the top and bottom. It also places a cope feature at the bottom, and corner features at the top face and inside edge.

Face and Edge_FE1003

FE1004

This assembly connection places a straight flange cut at the top, and a snipe flange cut at the bottom. It also places a cope feature at the bottom, and corner features at the top face and inside edge.

Face and Edge_FE1004

FX0001

This assembly connection places a web cut that is sniped back starting at an offset from the outside surface.

FX1001

This assembly connection places a bottom web cut sniped from the outside surface point offset. It also places straight flange cuts at the top and bottom.

Face and Outside_FX1001

FX1002

This assembly connection places a bottom web cut sniped from the outside surface point offset. It also places a straight flange cut at the top and a snipe flange cut at the bottom.

Face and Outside_FX1002

FX1003

This assembly connection places a bottom web cut sniped from the outside surface point offset. It also places a straight flange cut at the top and bottom.

Face and Outside_FX1003

M0001

This assembly connection places bisecting cuts. It applies whenever two identical members are connected end-to-end.

M0001

OM0001

This assembly connection is given with straight web and flange cuts for cross-sections such as W, L, T, PIPE, RS, and so on.

OM1001

This assembly connection places an extended part where the bounding object is a plate part and the bounding object and plate part boundary are the same.

MbrStdAC_OM1001

OM1002

Creates a lapped assembly connection between the member and the profile.

OM1002

N - Lap length

S0001

This assembly connection places a straight flange cut at the top and bottom.

S0002

This assembly connection places straight web and flange cuts with a gap of 250 mm. It applies whenever two identical members are collinear and attached end-to-end. You can adjust the gaps after placement.

S0002

S1001

This assembly connection places an extended straight web cut on the primary member, and a setback straight web cut on the secondary member. It also places straight flange cuts for the primary and secondary member's top and bottom flanges. This Smart item is available by rule when the input members are collinear and attached end to end. You can adjust the extension and setback values using the end cut properties.

Splits_S1001

S1002

This assembly connection places an extended straight web cut on one member and a setback straight web cut on the other member. It also places step snipe flange cuts on the primary member top and bottom flanges, and a straight flange cut on the secondary member. This Smart item is available by rule when the input members are collinear and attached end to end. You can adjust the extension and setback values using the end cut properties.

Splits_S1002

S1003

This assembly connection places a straight web cut on both members. It also places chamfered step snipe flange cuts for the primary member top and bottom flanges, and straight flange cuts on the secondary member.

  • You must define which member acts as the primary member before placing this assembly connection.

  • This Smart item is available by rule when the input members are collinear and attached end to end.

  • The primary and secondary members must have different flange widths.

Splits_S1003

S1004

This assembly connection places an extended straight web cut on the primary member. It also places a setback straight web cut for the secondary member, and right snipe flange cuts for the primary and secondary members' top and bottom flanges. This Smart item is available by rule when the input members are collinear and attached end to end. Select this Smart item by rule when the member cross sections are different. You can adjust the extension and setback values using the end cut properties.

Splits_S1004

S1005

This assembly connection places an extended straight web cut on the primary member. It also places a straight web cut for the secondary member, and left and right snipe flange cuts for the primary and secondary members' top and bottom flanges.

This Smart item is available by rule when the input members are collinear and attached end to end. Select this Smart item by rule when the member cross sections are different. You can adjust the extension and setback values using the end cut properties.

Splits_S1005

S1006

This assembly connection places a straight web cut on primary and secondary members. It also places step snipe flange cuts on the primary member top and bottom flanges. This Smart item is available by rule when the input members are collinear and attached end to end. Select this Smart item by rule when the member flange widths are different.

Splits_S1006

S1007

This assembly connection places an angled web cut between two members. It also places chamfered step snipe flange cuts for the primary member top and bottom flanges, and straight flange cuts on secondary member top and bottom flanges. This Smart item is available by rule when the input members are collinear, have different cross sections, and are attached end to end.

Splits_S1007

S1008

This assembly connection places an angled web cut between two members. It also places chamfered step snipe flange cuts for the primary member top and bottom flanges, and straight flange cuts on secondary member top and bottom flanges. This Smart item is available by rule when the input members are collinear, have different cross sections, and are attached end to end.

Splits_S1008

S1009

This assembly connection places a straight web cut on primary and secondary members. It also places chamfered step snipe flange cuts for the primary member top and bottom flanges, and straight flange cuts on the secondary member top and bottom flanges. This Smart item is available by rule when the input members are collinear, have different cross sections, and are attached end to end.

Splits_S1009

S1010

This assembly connection places an angled web cut between members. It also places chamfered step snipe flange cuts for the primary member top and bottom flanges, and straight flange cuts on the secondary member top and bottom flanges. This Smart item is available by rule when the input members are collinear, have different cross sections, and are attached end to end.

Splits_S1010

S1011

This assembly connection places an angled web cut between members. It also places step snip flange cuts for the primary member top and bottom flanges, and straight flange cuts on the secondary member top and bottom flanges. This Smart item is available by rule when the input members are collinear, have different cross sections, and are attached end to end.

Splits_S1011

S1012

This assembly connection places an angled web cut between members. It also places right snipe flange cuts for the primary member top and bottom flanges, and straight flange cuts for the secondary member top and bottom flanges. This Smart item is available by rule when the input members are collinear, have different cross sections, and are attached end to end.

Splits_S1012

S1013

This assembly connection places an angled web cut between members. It also places right snipe flange cuts for the primary member top and bottom flanges, and straight flange cuts for the secondary member top and bottom flanges. This Smart item is available by rule when the input members are collinear, have different cross sections, and are attached end to end.

Splits_S1013

S1014

This assembly connection places an angled web cut between members. It also places right snipe cuts for the primary member top and bottom flanges, and straight flange cuts on the secondary member top and bottom flanges. This Smart item is available by rule when the input members are collinear, have different cross sections, and are attached end to end.

Splits_S1014

S1015

This assembly connection places a straight web cut on primary and secondary members. It also places left snipe flange cuts for the primary member top and bottom flanges, and straight flange cuts on the secondary member top and bottom flanges. This Smart item is available by rule when the input members are collinear, have different cross sections, and are attached end to end.

Splits_S1015

S1016

This assembly connection places an angled web cut between members. It also places left snipe flange cuts for the primary member top and bottom flanges, and straight flange cuts on the secondary member top and bottom flanges. This Smart item is available by rule when the input members are collinear, have different cross sections, and are attached end to end.

Splits_S1016

S1017

This assembly connection places an angled web cut between members. It also places left snipe flange cuts for the primary member top and bottom flanges, and straight flange cuts on the secondary member top and bottom flanges. This Smart item is available by rule when the input members are collinear, have different cross sections, and are attached end to end.

Splits_S1017

S1018

This assembly connection places a straight flange cut at the top and a sniped setback at the bottom.

S1019

This assembly connection places a straight flange cut at the top and a sniped cut at the bottom.

SN0001

This assembly connection places a lap physical connection between bounded and bounding.

X0001 and X0002

This set of end cuts is for shaping parts within the flanges of the reference (hatched) member.

Two overlapping parts, Part 1 and Part 2, are placed manually (typically using PinPoint). The parts must be centered on the reference web, each oriented with the top surface outward.

Part 1 and Part 2 must have end-to-end frame connections at each end.

There is no connection between Part 1 or Part 2 and the reference member.

X0001A or X0002A should be placed at one end, and X0001B or X0002B at the opposite end.

Each connection trims the ends of both members.

X0001A and X00002A also remove the bottom portion of each member.

Physical connections are created manually.

XX0001

This assembly connection places a sniped web cut and flange cuts at the top and bottom of the bounded standard member.

SnipedWebCut_FlangeCuts_MbrStdAC_XX0001

XX0002

This assembly connection places a hook type web cut and a straight flange cut at the top and bottom. It also places a snipe corner feature at the top and bottom face corners.

XX0002

X0003

This assembly connection places sniped flange cuts at the top and bottom. It also places a sniped web cut at the top and bottom, and a straight web cut at the center.

XX0003

Table 1: Flange Fillet Weld

Bounded Thickness

Fillet Leg Length (W)

0 mm < BT <= 8 mm

8 mm

8 mm < BT <= 10 mm

10 mm

10 mm < BT <= 12 mm

12 mm

12 mm < BT <= 15 mm

15 mm

15 mm < BT <= 20 mm

20 mm

20 mm < BT <= 25 mm

25 mm

30 mm < BT

30 mm

Table 2: Web Fillet Weld

Bounded Thickness

Fillet Leg Length (W)

0 mm < BT <= 10 mm

5 mm

10 mm < BT <= 12 mm

6 mm

12 mm < BT <= 15 mm

8 mm

15 mm < BT <= 20 mm

10 mm

20 mm < BT <= 25 mm

12 mm

25 mm < BT <= 30 mm

15 mm

30 mm < BT

20 mm

Table 3

Flange Width (FW)

Nose (N)

FW <= 150 mm

25 mm

150 mm < FW

50 mm

Flange Width Nose

Connections

Connections apply to all cross-sections, unless otherwise noted. If the symbols in the table below display next to a part, that part is limited to those sections. If multiple designations apply, they are shown separated by a comma. If a minus sign ( - ) precedes the designations, the connection applies to all cross-sections except those listed. For example, -BU indicates that all cross-sections except for the Built-Up Angle apply to the connection.

Angle (all types)

Angle (all types)

Angle X-Type

Angle X-Type

Box (all types)

Box (all types)

Box (extruded)

Box (extruded)

Built-Up Angle

Built-Up Angle

Built-Up Box

Built-Up Box

Buit-Up Channel

Built-Up Channel

Built-Up I-Beam

Built-Up I-Beam

Bulb Tee

Built-Up Tee

Bulb Angle

Bulb Angle

Bulb Tee

Bulb Tee

Channel (all types)

Channel (all types)

Channel S-Type

Channel S-Type

Channel X-Type

Channel X-Type

Flat Bar

Flat Bar

Half-Round Bar

Half-Round Bar

I-Beam (all types)

I-Beam (all types)

I-Beam S-Type

I-Beam S-Type

I-Beam X-Type

I-Beam X-Type

Rectangular Bar

Rectangular Bar

Round Bar

Round Bar

Round Tube

Round Tube

Tee (all types)

Tee (all types)

Tee S-Type

Tee S-Type

Tee X-Type

Tee X-Type