Modify a straight segment in a path - Intergraph Smart 3D - Help

Intergraph Smart 3D Space Management

Language
English
Product
Intergraph Smart 3D
Subproduct
Space Management
Search by Category
Help
Smart 3D Version
11 (2016)
  1. Click Select .

  2. Select the volume for which you want to modify the path.

    You can modify the volume's path only if you created that volume using Place Volume Along Path Command .

  3. Click Path to display the path in yellow.

  4. Select the straight segment that you want to modify.

  5. To change the line type for the segment, click a new type in the Path Type list.

  6. To change the plane for the segment, click a new plane in the Plane list.

  7. To delete the segment, click Delete .

  8. If you want the length of a straight segment to remain constant when you move the segment, click Length Locked . When the segment length is locked, the software automatically modifies the turn points, along with the length and angle of the adjacent segment, to remain connected to the moved segment. The length of the moved segment does not change. When the segment length is not locked, the software extends or shortens the associated segments to connect with the new position of the moved segment. The length of the moved segment can change.

  9. Click Finish to accept the path changes.

  10. Click Finish to modify the volume.

You can also Move segments of a path.