Pipe Rack Zone Sheet - Intergraph Smart 3D - Reference Data - Hexagon PPM

Intergraph Smart 3D Space Management Reference Data

Language
English
Product
Intergraph Smart 3D
Subproduct
Space Management
Search by Category
Reference Data
Smart 3D Version
13.1

The Pipe Rack Zone sheet in the SpaceMgmt.xls workbook defines zones that contain pipe racks.

In addition to the common properties discussed in Space Management Sheets, the following properties can be defined for a pipe rack zone:

CostFactor

Type a factor that specifies the relative cost of routing pipe through the zone.

OnFace

Type the code that represents on which face of the zone the routed pipe will lie. Valid codes and short descriptions are listed in the AllCodeLists.xls workbook on the Route On Face sheet in the Codelist Number and Route On Face Short Description columns.

Layout

Type the code that represents how the routed pipes are arranged on that face of the pipe rack zone. Valid codes and short descriptions are listed in the AllCodeLists.xls workbook on the Route Layout sheet in the Codelist Number and Route Layout Short Description columns.

RouteDirection

Type the code that represents the direction relative to the local coordinate system in which pipe will be routed. Valid codes and short descriptions are listed in the AllCodeLists.xls workbook on the Route Direction sheet in the Codelist Number and Route Direction Short Description columns.

SteelAnalysis

Type the structural steel analysis code for the pipe rack zone. Valid codes and short descriptions are listed in the AllCodeLists.xls workbook in the Short Descriptions and Codelist Number columns on the IcarusStructSteelAnalysis sheet.

ColumnBaseOption

Type the code that represents the connection at the column base for the pipe rack zone. Valid codes and short descriptions are listed in the AllCodeLists.xls workbook in the Short Descriptions and Codelist Number columns on the IcarusColumnBaseOption sheet.

GratingType

Type the code for the type of grating used for the pipe rack zone. Valid codes and short descriptions are listed in the AllCodeLists.xls workbook in the Short Descriptions and Codelist Number columns on the IcarusGratingType sheet. For example, 50 represents a 1/4 IN [5 MM] SS slipnot plate.

PipeRackType

Type the code for the pipe rack type code for the pipe rack zone. Valid codes and short descriptions are listed in the AllCodeLists.xls workbook in the Short Description and Codelist Number columns on the IcarusPipeRackType sheet.

ConcreteType

Type the code that represents the type of concrete used in the pipe rack zone. Valid codes and short descriptions are listed in the AllCodeLists.xls workbook in the Short Description and Codelist Number columns on the IcarusConcreteType sheet. For example, 10 represents Higher grade concrete (Type C).

ThirdColumnOption

Type the code that represents whether or not a third row column is required for the pipe rack zone. Valid codes and short descriptions are listed in the AllCodeLists.xls workbook in the Short Description and Codelist Number columns on the IcarusThirdColumn sheet.

EndBentExclusion

Type the code that represents whether or not to exclude end bents in the pipe rack zone. Valid codes and short descriptions are listed in the AllCodeLists.xls workbook in the Short Description and Codelist Number columns on the IcarusExcludeEndBent sheet.