HVAC Material Take-Off (HVAC) - Intergraph Smart 3D - Help

Intergraph Smart 3D Reports

Language
English (United States)
Product
Intergraph Smart 3D
Subproduct
Drawings and Reports
Search by Category
Help
Smart 3D Version
11 (2016)

HVAC duct, fabricated parts, fittings, transitions, registers, and dampers are listed with quantities and other information.  This may be embedded into a drawing.

[Reference Data Folder]\SharedContent\Reports\Types of Reports\HVAC\Material Take-Off\Material Take-Off.rtp

Duct

Section  #FormattingUOM::{Section}#  #Duct::[CrossSection]#
Length  #FormattingUOM::{Length}#  #Duct::[LengthFormatted]#
Sheet Weight  #FormattingUOM::{Weight}#  #Duct::[WeightFormatted]#

Total Weight  (SUM)

Fabricated Part

Name  #Fabricated::Name#
Duct Section Max  #FormattingUOM::{Section}#  #Fabricated::CrossSectionMax#
Sheet Weight  #FormattingUOM::{Weight}#  #Fabricated::[outHVAC Fabricated Weight]#

Total Weight (SUM)

Fitting

Item Number  #Fitting::ItemNum#
Category  #Fitting::Category#
Description  #Fitting::PartDescription#
Angle  #FormattingUOM::{Angle}#  #Fitting::[outHVAC Angle Value]#
Inlet  #FormattingUOM::{Section}#  #Fitting::Inlet#
Outlet  #FormattingUOM::{Section}#  #Fitting::Outlet#
Branch1  #FormattingUOM::{Section}#  #Fitting::Branch1#
Branch2  #FormattingUOM::{Section}#  #Fitting::Branch2#
Quantity  #Fitting::[Quantity]#
#Fitting::PlaneOfTurn#
#Fitting::ElbowThroatRadius#
#Fitting::CornerRadius#
#Fitting::Angle#
#Fitting::CategorySort#
#Fitting::Diff#

Transition

Item Number  #Transition::ItemNum#
Category  #Transition::Category#
Description  #Transition::PartDescription#
Length  #FormattingUOM::{Length}#  #Transition::[outHVAC Transition Length]#

Inlet  #FormattingUOM::{Section}#  #Transition::Inlet#
Outlet  #FormattingUOM::{Section}#  #Transition::Outlet#
Quantity  #Transition::[Quantity]#
#Transition::Length#
#Transition::Diff#

Register – Diffuser – Grille

Type  #Register::Type#
Section  #Register::[outHVAC Linear Duct Cross Section Size]#
Model  #Register::Model#
Quantity  #Register::[Quantity]#

Damper – Other In-line

Type #Damper::Type#
Duct Section #FormattingUOM::{Section}# #Damper::CrossSectionMax#

Model #Damper::Model#
Quantity #Damper::[Quantity]#