Variables
Specifies the name of the rule variable.
Distance Tolerance
Compares distance related properties such as length and width. This option applies to Plates, Profiles, Collars, Brackets, and Members object types.
Thickness Tolerance
Compares thickness property of Plates, Collars, and Brackets object types.
Area Tolerance
Compares area related properties such as area and surface area. This option applies to Plates, Profiles, Collars, Brackets, and Members object types.
Volume Tolerance
Compares part volumes. This option applies to Profiles and Members object types.
Angle Tolerance
Compares bevel angle properties. This option applies to Plates, Profiles, Collars, Brackets, and Members object types.
Weight Tolerance
Compares properties like dry and wet weight. This option applies to applicable to Plates, Profiles, Collars, Brackets, and Members object types.
Flipping Part
Checks whether a part can be flipped for the geometry comparison. This option applies to Plates, Collars, and Brackets object types.
Bevel Validation Level
If Bevel Validation Level is 1, then the software compares common properties. If Bevel Validation Level is other than 1, then the software compares additional properties such as secondary bevel depth and angles. This option applies to Plates, Profiles, Collars, Brackets, and Members object types.
Units
Initiates the units of the rule variable.
Values
Specifies the value of the variable.
Start Test Command
Initiates the Test Rules command.
Save As
Prompts you to name the rule settings and save them in a required location.
Save
Saves the rule setting in the current location.
Close
Closes the Edit Rule Setting dialog box.