8. Opening the Published VUE File in Intergraph Smart Review - Intergraph Smart 3D - Help

Intergraph Smart 3D Piping

Language
English
Product
Intergraph Smart 3D
Subproduct
Piping
Search by Category
Help
Smart 3D Version
12 (2018)
SmartPlant Foundation / SDx Version
10

You can now open the published VUE file to see the graphics of the pipe centerlines and support loads from CAESAR II.

  1. Open SmartPlant Review.

  2. Click File > Open, and then select the VUE file you published using SmartPlant Review Publisher. In the example graphic, the pipe centerline from a stress model is shown along with cones indicating the position of the supports. The direction of the cone does not represent the type or direction of the actual support.

  3. Select a load cone feature in the main view, and then click View > Properties to display the Properties dialog.

Using the Properties command, you can see the properties for load cones and for pipeline segments. This data is the result of the pipe stress analysis from CAESAR II. The example figure below shows load cone properties and the load cases.

You can also select a pipe feature and see the centerline properties as shown in the example figure below.