General Tab (Pipe Weld Properties Dialog) - Intergraph Smart 3D - Help

Intergraph Smart 3D Piping

Language
English
Product
Intergraph Smart 3D
Subproduct
Piping
Search by Category
Help
Smart 3D Version
11 (2016)
SmartPlant Foundation / SDx Version
10

Displays and defines the general properties of the selected weld. Properties are defined in the reference data.

Weld properties are divided into different categories: Standard and Testing. You select which category that you want to define values for by using the Category option.

Standard

Name

Displays the name of the weld. The weld name is based on the Name Rule selection. If you want to type a new name for the weld, then type a name for the weld in the Name box. If you do specify the name of the weld yourself, do not include spaces in the weld name.

Name Rule

Specify the naming rule that you want to use to name this weld.

Class

Specifies the weld class. To change the options on the list, edit the Weld Type select list in Catalog.

Type

Specifies the weld type. Valid types are listed in the AllCodeLists.xls workbook on the Weld Type sheet. If appears in the box, the weld type is inherited from the pipe run to which the weld belongs. If the icon does not appear, and you want to use the weld type from the pipe run, select By Rule.

Welding Procedure Specification

Specifies the welding procedure specification.

Materials Category

Specifies the materials category for the weld. To change the options on the list, edit the Materials Grade select list in Catalog.

Materials Grade

Specifies the materials grade for the weld. To change the options on the list, edit the Materials Grade select list in Catalog.

Gap

Specifies the gap between the welded ends of the welded joint.

Pass Length

Specifies the weld length.

Thickness

Specifies the weld thickness.

Height

Specifies the weld height.

Owning Part

Select the component that owns the weld. The weld displays on the parent component's isometric sheet.

Sequence ID

Specifies the object sequence ID.

Testing

Testing Requirements

Specifies the type of non-destructive testing required for welds. To change the options on the list, edit the Testing Type select list in Catalog.

Testing Type

Specifies the type of non-destructive weld testing for the welds. To change the options on the list, edit the Testing Type select list in Catalog.

Testing Percentage

Specifies the percentage of the welds on this pipe run that are to be tested. This option is available only if you are viewing pipe run properties.

See Also

Pipe Weld Properties Dialog Box