Route a branch at a specific angle - Intergraph Smart 3D - Help - Hexagon

Intergraph Smart 3D Piping

Language
English
Product
Intergraph Smart 3D
Subproduct
Piping
Search by Category
Help
Smart 3D Version
13
SmartPlant Foundation / SDx Version
10
  1. Click Route Pipe on the vertical toolbar.

  2. Select the branch run starting point (the end not connected to the header).

  3. Select a point on the header at approximately the correct angle and direction that you want.

  4. In the Locate Filter, select Piping Features.

  5. Select the pipe along leg feature where the branch connects to the header. You might need to use QuickPick to select the correct feature.

  6. In the Angle 1 box on the ribbon, type the actual angle at which the branch is to connect to the header.

If the piping specification that you selected has service limits defined, you must define at least one temperature value and one pressure value for the branch. Do this by selecting Temperature and Pressure from the Category option.