Modify the length of a purchased length pipe - Intergraph Smart 3D - Help - Hexagon

Intergraph Smart 3D Piping

Language
English
Product
Intergraph Smart 3D
Subproduct
Piping
Search by Category
Help
Smart 3D Version
13.1
SmartPlant Foundation / SDx Version
10

Replace Two Straight Features with a Straight Feature

  1. Click Select on the vertical toolbar.

  2. Select Piping Features in the Locate Filter box.

  3. Press the CTRL key and select the required straight features graphically. For example, select two pipes of length 750 mm each.

  4. Click Properties on the ribbon to display the Pipe Straight Feature Properties Dialog.

  5. Change the Option value. For example, select 1500 mm.

  6. Click OK.

  7. Delete split 1 to replace the two 750 mm pipes with a 1500 mm pipe.

Split a Straight Feature

  1. Click Select on the vertical toolbar.

  2. Select Piping Features in the Locate Filter box.

  3. Select the straight feature to split. For example, select a 2000 mm pipe.

  4. On the ribbon, change the Option value. For example, if you change 2000 mm to 750 mm, the software splits the 2000 mm pipe into two 750 mm pipes and a 500 mm pipe. If the routed pipe exceeds the specified length, the software places a split.

  5. Select the straight feature that does not have a value for Option.

  6. On the ribbon, select the appropriate length value from the Option list. For example, select 500 mm so that route generates a 500 mm pipe stock.