Grouping pipe parts by control points - Intergraph Smart 3D - Help - Hexagon

Intergraph Smart 3D Piping

Language
English
Product
Intergraph Smart 3D
Subproduct
Piping
Search by Category
Help
Smart 3D Version
13.1
SmartPlant Foundation / SDx Version
10
  1. On the WBS tab of the Workspace Explorer, verify that you have a parent WBS item or WBS project to which to assign the generated WBS items. If you do not have a parent WBS project, see Create a new WBS project.

  2. Place the control points using the Insert > Control Point Command. Be sure to select the correct control point subtype when placing the control points and that you place the control points on the piping connection objects. See Add control points.

  3. On the vertical toolbar, click Group Pipe Parts Command to display the Automated WBS Creation Dialog.

  4. Select the Options Tab.

  5. Set WBS Automated Creation Rule Name to the WBS rule that you want to use. These rules are defined in the Catalog task under Piping > Piping Specification > Model Rules > WBS Creation Rule.

  6. Set WBS Item's Parent to the WBS project or the WBS item that you created or identified in step 1.

  7. Set Discrimination Filter to the filter that you want to use.

  8. Review the remaining options and set as needed, and then click OK.

  9. Select the Log Tab.

  10. Review the log. Click Save Log to save the log to a text file if needed. After processing, you can view the WBS items on the WBS tab in the Workspace Explorer.