Move a pipe end - Intergraph Smart 3D - Help - Hexagon

Intergraph Smart 3D Piping

Language
English
Product
Intergraph Smart 3D
Subproduct
Piping
Search by Category
Help
Smart 3D Version
13.1
SmartPlant Foundation / SDx Version
10
  1. Click Select on the vertical toolbar.

  2. Select Piping Features in the Locate Filter.

  3. Select the pipe end that you want to move. Make sure you select the pipe end and not the pipe itself.

  4. Click Move To on the ribbon.

  5. Identify the new location for the pipe end.

  • You can use the Length box to type a new length for the pipe. The software moves the pipe end to the specified length.

  • If there is an elbow at the other end of the pipe, use the Angle box to specify a turn angle for the elbow. The software orients the pipe to the specified angle.

  • If you move a pipe end within ΒΌ inch (6.35 mm) of another pipe end, the software automatically connects to two ends. Please note that the software will lengthen or shorten the pipe length as needed to make the connection.