The delivered marine mode drawings by rule packages include the following:
On the Ship tab of the Add Component Dialog:
Drawings by Rule
Creates a Drawing by Rule component in the Management Console. The component allows you to create empty drawings by rule to which you add the needed views.
Assembly Drawings
On the Ship tab of the Add Component Dialog:
Assembly Method
Creates views of individual parts and an isometric of the assembly.
Assembly Sequence
Creates views showing the sequence of parts.
Assembly
Creates plan, elevation, and isometric views for an assembly. All views are on a single drawing sheet.
Assembly (Generic)
Creates plan, elevation, and isometric views for an assembly using the more efficient generic ruleset. All views are on a single drawing sheet.
See Assembly Drawings in Smart 3D Orthographic Drawings Help.
Hull Line Drawings
On the Ship tab of the Add Component Dialog:
Hull Lines
Creates body plan, plan, and profile views of the hull lines.
Body Plan
Creates body plan views of the hull lines.
See Hull Lines Drawings in Smart 3D Orthographic Drawings.
Manufacturing Drawings
On the Manufacturing tab of the Add Component Dialog:
Mfg PinJig
Contains an asking filter to select the pin jigs.
Mfg Profile Sketch
Contains an asking filter to select the profile.
Mfg Profile Sketch (Multiple)
Contains an asking filter to select the profiles.
Mfg Template Set
Contains an asking filter to select the template sets.
Mfg Templateset (Full Scale) Package
Contains an asking filter to select the template sets. See Mfg Templateset (Full Scale) Package in Smart 3D Drawings and Reports Reference Data.
See Manufacturing Drawings in Smart 3D Orthographic Drawings Help.
Scantling Drawings
On the Ship Structure tab of the Add Component Dialog:
Shell Expansion
Creates unfolded port and starboard views of shell plate.
Steel Order by Block or Assembly
Creates transverse, longitudinal, deck shell expansion, and shell profile views for plate and profile parts within selected blocks or assemblies.
Steel Order by Reference Planes
Creates a single drawing for each reference plane selected as input.
Steel Order (Expansion)
Creates expanded shell profile views for plate and profile parts.
Steel Order (Shell Profiles)
Creates plan views of individual shell profiles, also showing level 2 non-target parts connected to the profiles.
Steel Order by Block or Assembly (Generic)
Creates transverse, longitudinal, deck shell expansion, and shell profile views for plate and profile parts within selected blocks or assemblies using the more efficient generic ruleset.
Steel Order by Reference Planes (Generic)
Creates a single drawing for each reference plane selected as input using the more efficient generic ruleset.
Steel Order - Shell Profiles (Generic)
Creates plan views of individual shell profiles showing level 2 non-target parts connected to the profiles using the more efficient generic ruleset.
The Steel Order packages use scantling steel order rule sets and view styles for light (non-detailed) parts created in the Molded Forms task and detailed parts created in the Structural Detailing task. The packages also use short name and typical labels for profiles and plates.
See Scantling Drawings in Smart 3D Orthographic Drawings Help.
Offshore Drawings
On the Offshore tab of the Add Component Dialog:
Member Parts
Creates drawings of individual member parts and their connected parts. Two views are generated for each member part: one in the -Z direction and one in the +Y direction of the member local coordinate system.
Member Parts (Generic)
Creates drawings of individual member parts and their connected parts using the more efficient generic ruleset. Two views are generated for each member part: one in the -Z direction and one in the +Y direction of the member local coordinate system.
Pipe Supports (Generic)
Creates end, side, isometric, and detail views of a pipe support. All views are on a single drawing sheet.
Piping (Generic)
Creates forward-looking elevation, port-looking elevation, isometric, and plan views for a pipeline. All views are on a single drawing sheet.
For volume-drawing-based orthographic piping packages, see Piping Packages in Smart 3D Drawings and Reports Reference Data.
Baseline Drawings by Rule Package
You can also use the baseline Drawings by Rule component to create an empty drawing component to which you can add views as needed. The Drawings by Rule component displays on the Ship tab of the Add Component dialog. After adding the component to a Management Console folder, you can set it up with views and reports, specify the query definition, and create drawings.