-
Click Seam by Table Command to display the Seam By Table Ribbon.
-
Select the plate system for the seam.
-
Click Landing Curve Table .
-
Define the landing curve coordinates in the table using the Landing Curve Table Dialog.
-
Click Close.
-
Click Boundaries .
-
Define the seam boundaries using one or more of the following methods. If you do not select boundaries, the software uses the entire length of the base curve to apply to the resulting seam curves.
-
Click Accept .
-
Select whether to place a design seam or a planning seam.
-
If the boundary definition results in two solutions, pick the needed solution using the following procedure:
-
Click Finish to place the seam.