Change a geometric construction to a different definition - Intergraph Smart 3D - Help

Intergraph Smart 3D Molded Forms

Intergraph Smart 3D
Molded Forms
10.1 (2014 R1)

Use this procedure when the geometric construction displays after clicking Continue on a geometric construction ribbon but before clicking Close on the geometric construction ribbon.

  1. On the geometric construction ribbon, click Select .

    Do not click Select on the vertical toolbar. This removes you from your current command and deletes all temporary geometric constructions.

  2. In a graphic view or the Geometric Construction Explorer, select the geometric construction to modify.

    The geometric construction highlights in the graphic view, the ribbon for the geometric construction displays, and the inputs highlight in the Workspace Explorer.

  3. In the Macro Definition box, click More.

    The Select Geometric Construction dialog box displays showing the appropriate geometric constructions. For example, if the original geometric construction is a point, then only points appear.

  4. Select the needed geometric construction, and then click OK.

    The new selection displays in the Macro Definition box with a yellow background. Options with blue backgrounds contain new values suggested by the software. Options with white backgrounds retain the values from the previous geometric construction.

  5. Make the required changes to options on the ribbon.

    Changed options appear with a yellow background.

  6. Click Accept .

    A preview of the changed geometric construction displays.

  7. Click Continue.

    Temporary geometry displays in the graphic view.

  8. If required, create or modify additional geometric constructions.