Curves (Geometric Construction Palette Dialog) - Intergraph Smart 3D - Help - Hexagon

Intergraph Smart 3D Molded Forms

Language
English
Product
Intergraph Smart 3D
Subproduct
Molded Forms
Search by Category
Help
Smart 3D Version
13

The following geometric construction interfaces create lines and curves.

Each command supporting the Projection3D option displays tabs and interfaces appropriate to the command.

Curve by Points on Surface

Creates a curve by interpolation through a set of points. Some points can be designated as knuckles so that the curve has discontinuous tangency.

Curve by Two Points on Surface

Creates a curve between two points projected onto a surface. The curve can be created with or without extensions at each end.

Fillet by Curve

Creates a blended fillet of a specified radius between two curves that are end-connected and projected onto a surface.

Curve by Curves

Creates a single curve from two or more end-to-end curves.

Curve by Intersection

Creates a curve along the intersection of two surfaces.

Curve at Offset by Intersection

Creates a curve offset from the intersection of a surface or plane with a surface.

Line from Coordinate System

Creates a line along a coordinate system axis.

Line by Points

Creates a line between two points.

Parallel Line

Creates a line parallel to another line.

Line by Point, Angle, and Length

Creates a line at a defined angle and length on a coordinate system plane.

Line String by Points

Creates a line string between a series of two or more points.

Edge from Curve or Surface

Creates a curve at an edge of a surface, such as a plate, the landing curve of a profile, or a solid.

Edges from Curve or Surface

Creates one or more curves at each edge of a surface, such as a plate, the landing curve of a profile, or a solid.

Polyline by One to Four Segments

Creates a polyline string of up to four curves by defining point coordinates on a reference plane.

Curve as Extended Section

Copies polyline cross-sections.