Reference Curve by 2D Sketch Command - Intergraph Smart 3D - Help - Hexagon

Intergraph Smart 3D Molded Forms

Language
English
Product
Intergraph Smart 3D
Subproduct
Molded Forms
Search by Category
Help
Smart 3D Version
13

The Reference Curve by 2D Sketch command creates a reference curve on the selected plate system by projecting a 2D landing curve that you have sketched onto the plate system.

You can control the boundaries of the reference curve by selecting a plate system, or reference curve that intersects the landing curve. If you do not define boundaries, the software uses the landing curve ends as the reference curve boundaries. Reference curves must end at a plate system boundary or at another reference curve on the same plate system. The reference curve can cross an opening in the plate system.

Reference Curve by 2D Sketch Ribbon

What do you want to do?