Displays belt properties that you can edit or that are automatically determined by the software at placement. The property name appears on the left side of the grid and the corresponding property value appears on the right side of the grid. If you selected more than one conveyor belt, only the common properties between the selected belts display.
The following properties display for the delivered reference data.
Category
Displays the properties that you want to view for the belt. Belt properties have the following categories: Standard and Responsibility.
Standard
Parent System
Specifies the system to which the belt belongs.
Naming Rule
Specifies the naming rule that you want to use to name this belt.
Default Name Rule
Names the belt using the format "BeltSystem-<location>-<index>" where <location> is the global workshare location ID and <index> is a unique index number that starts at 0001. For example, BeltSystem-1-0043.
MaterialsHandlingNameRule
Names the belt using the format "BeltSystem-<location>-<index>" where <location> is the global workshare location ID and <index> is a unique index number that starts at 0001. For example, BeltSystem-1-0043.
User Defined
Select to specify the belt system name yourself in the Name box.
Name
Displays the name of the belt. The belt name is based on the Naming Rule selection. If you want to type a new name for the belt, in the Name Rule box, select User Defined, and then type a name for the belt in the Name box.
Belt Type
Specifies the belt type.
Belt Width
Specifies the width of the belt.
Belt Thickness
Specifies the thickness of the belt
Top Cover Thickness
Specifies the thickness of the top cover.
Bottom Cover Thickness
Specifies the thickness of the bottom cover
Belt Material
Specifies the material used for the construction of the belt.
Belt Material Grade
Specifies the grade of the material used for the belt.
Belt Density
Specifies the density of the belt material.
Belt Designation
Specifies the load bearing capacity of the belt.
Belt Troughing Angle
Specifies the troughing angle of the belt path on the carry side. This troughing holds the material.
Belt Tail Transition Length
Specifies the length of the tail pulley side of the belt path.
Belt Head Transition Length
Specifies the length of the head pulley side of the belt path.
Responsibility
Cleaning Responsibility
Specifies the cleaning responsibility for the conveyor belt.
Design Responsibility
Specifies the design responsibility for the conveyor belt.
Fabrication Responsibility
Specifies the fabrication responsibility for the conveyor belt.
Installation Responsibility
Specifies the installation responsibility for the conveyor belt.
Painting Responsibility
Specifies the painting responsibility for the conveyor belt.
Requisition Responsibility
Specifies the requisition responsibility for the conveyor belt.
Supply Responsibility
Specifies the supply responsibility for the conveyor belt.
Testing Responsibility
Specifies the testing responsibility for the conveyor belt.