Place Tab (Trestles) - Intergraph Smart 3D - Help

Intergraph Smart 3D Material Handling

Language
English
Product
Intergraph Smart 3D
Subproduct
Material Handling
Search by Category
Help
Smart 3D Version
12.1 (2019)

Controls parameters for placing 2D trestles.

Trestle Type

Specifies the trestle type.

Preview

Displays an example diagram similar to the figure below:

Symbol Details

Symbol Directory

Specifies the folder in which the symbol file resides.

Symbol File

Specifies the file that defines the symbol.

Placement Parameters

Base Width

Specifies the trestle base width.

Top Beam Length

Specifies the trestle top beam length.

Clearance Height

Specifies the height between the first selection point for trestle 2D symbol placement and the top of the top beam.

Display Grid Lines

Displays the grid lines and planes in the model and in the Workspace Explorer. This allows you to use the grid planes to modify the trestle members in the model.

Number of Cross Beams

Specifies the number of cross beams included in the trestle. This option is only available if the Trestle Type is set to Trestle.

Angle

Indicates the angle between the column and the base. Type the angle in the box. This option is only available if the Trestle Type is set to Trestle.

Working Point

Specifies the top distance between the columns. Type the working point distance in the box. This option is only available if the Trestle Type is set to Trestle.

Footings

Specifies the required footings. Type a name in the box, or select a footing from the Select Equipment dialog. This option is only available if you select the check box.

Depth

Specifies the depth of the footings. Type the depth in the box.

Layer Name

Specifies the required layer. Type a name in the box, or select a name in the list. To create a new layer, click New Layer.

New Layer

Opens the Layer Properties Dialog (Trestles) so that you can create a new layer. Layers created using New Layer are also visible in the Layer Display Dialog, which is accessible using the Tools > Layers Command in Sketch 2D. See SmartSketch Drawing Editor Help.

Properties

Opens the Layer Properties Dialog (Belt Components) so you can specify the name of the parent system.