Modify Components Relation Command - Intergraph Smart 3D - Help

Intergraph Smart 3D Material Handling

Language
English
Product
Intergraph Smart 3D
Subproduct
Material Handling
Search by Category
Help
Smart 3D Version
12 (2018)

Reverses the placement direction relation of the belt components with the head-end or tail-end. Use this command before you modify the belt profile so that the associated belt components do not move when you modify with the belt.

The carry-side components default placement direction relation is TailEnd to HeadEnd. The default placement direction relation for return-side components is HeadEnd to TailEnd. When you reverse the relation, the software measures the distance of the carry-side components from the head-end, and measures the distance of the return-side components from the tail-end.

  • You must select either a carry-side or return-side belt segment, so that the software applies the new relation to all the associated components.

  • After you modify the belt profile, reset the placement direction relation to the default setting, after modifying the belt profile.

  • The placement direction relation of a new component is always default.

Modify Components Relation Ribbon