Create the custom profile and data report - Intergraph Smart 3D - Help

Intergraph Smart 3D Material Handling

Language
English
Product
Intergraph Smart 3D
Subproduct
Material Handling
Search by Category
Help
Smart 3D Version
11 (2016)
  1. In the Drawings and Reports task, click Tools > Edit Border Template Command (Tools Menu) to display the Select Template Dialog.

  2. Select BeltProfileData.sha in the Template list, and click OK to display SmartSketch Drawing Editor.

  3. Click Line on the vertical toolbar, and draw a report table in the drawing template similar to the one in the example below.

  4. Click Text Box on the vertical toolbar.

  5. On the Text Box ribbon, set Font Size to 10mm, and insert the required label text as shown in the example below.

  6. On the Drawing Labels toolbar, click Place Drawing Property Label Command .

  7. In the Label Set list, select MHECustom. The list reflects the label sets within the drawing XML schema. The Label Set selection controls the contents of the Fields list and the enabling of other controls on the ribbon.

  8. In the Fields list, select PDRCapacityRequired to use as your drawing property label.

  9. Zoom in to the area of the border where you want to place the drawing property label, and click to place the label.

  10. After the label is placed, use Selecton the vertical toolbar to position and resize the label as needed.

  11. Repeat steps 6 through 10 to place and position the PDRCapacityInstalled and PDRCapacityMaximumFuture property labels, as shown in the example below.

  12. Save the changes to the template, and exit SmartSketch Drawing Editor.

  13. Create a New Composed Drawing.

  14. Right-click the composed drawing, and select Properties Command.

  15. On the Custom Tab (Properties Dialog), define the attributes as listed below and then click OK.

    Name

    Value

    Behavior

    Capacity Required

    1250TPH

    Override

    Capacity Installed

    1500TPJ

    Override

    Capacity Maximum Future

    1600TPH

    Override

  16. Right-click the composed drawing, and select Update Now Command.

  17. Right-click the composed drawing, and select Edit Command.

    The drawing opens in the SmartSketch Drawing Editor, and displays the updated data.