Place a trestle - Intergraph Smart 3D - Help - Hexagon PPM

Intergraph Smart 3D Material Handling

Language
English
Product
Intergraph Smart 3D
Subproduct
Material Handling
Search by Category
Help
Smart 3D Version
13
  1. Click Place Trestle Command on the vertical toolbar.

  2. Select a belt profile, either from the Workspace Explorer or from the graphic view.

  3. Click Select Symbol File modify belt components to display the Review Dialog.

  4. Select the symbol file for the required trestle, and then click OK.

  5. Select the parent system for the trestle in the Select Parent list.

  6. Specify the symbol file name in the Symbol File Name box.

  7. Click Add Projection Item .

  8. Select the items to add. You can select items in the model or in the Workspace Explorer. These items display in Sketch 2D.

  9. Click Sketch2D .

  10. Fit the view so that all of your projected items display.

  11. Click Place 2D Trestle (Sketch 2D - Custom Command) to display the Place 2D Trestles Dialog Box.

    If the command does not display, you must first add the custom command. See Add custom commands to the Sketch 2D toolbar.

  12. Define the parameters in the dialog as needed.

  13. Select the top point for the trestle.

  14. Select the bottom point for the trestle.

  15. Continue to define the parameters and points for the trestle parts.

  16. Click Finish in Sketch 2D.

    The software returns to the 3D environment, and highlights the trestles.

  17. Click Finish on the Place Trestle ribbon.

    The software adds the trestles to the model.