Place modules - Intergraph Smart 3D - Help - Hexagon PPM

Intergraph Smart 3D Material Handling

Language
English
Product
Intergraph Smart 3D
Subproduct
Material Handling
Search by Category
Help
Smart 3D Version
13.1

Show me

  1. Click Place Belt Components in 3D Command on the vertical toolbar.

  2. Select a belt profile.

  3. In the Select Parent box, select a parent system for the trusses.

  4. In the Type of Components box, select Modules to display the Place Module Dialog.

  5. Select the truss module, and select or create a system for the trusses.

  6. Type the number of trusses, the offset of the first truss from the starting location, and the spacing between trusses.

  7. Select the module orientation.

    SHARED Tip Normal to Belt is a common orientation.

  8. Select a selection mode and a placement direction.

  9. In the graphic view, click a starting location. Click a point for the Point on Belt Path selection mode, or click existing equipment or modules for the Existing Module selection mode.

  10. Click Preview in the dialog.

    A preview of the trusses displays.

  11. To change the trusses, click Undo, and then make the required changes to the truss properties.

  12. To place the trusses and leave the dialog open for addition placement, click Apply.

  13. To place the trusses and close the dialog, click OK.

    The software add the truss symbols to the model.

To add packing between idlers and trusses, see Packing Thickness in 3D Command.