DIN Wall Thickness Data Sheet - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Material Handling Reference Data

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Reference Data
Version_SThreeD_Custom
12.1 (2019)

The DIN Wall Thickness Data sheet in the AllCommon.xls workbook defines wall thicknesses for the DIN standard.

First Size

Type a size or thickness.

First Size Units

Specifies the units for the First Size column. For example, type in for inches or mm for millimeters.

Second Size

Type a second size or thickness.

Second Size Units

Specifies the units for the Second Size column. For example, type in for inches or mm for millimeters.

MultiSize Option

Type a string to represent an optional selection for multi-sized fittings when the first size and second size are inadequate. For example, if two additional sizes (2" and 1") are required in addition to a first size of 6" and a second size of 4", the string that would represent the sizes would be 6"x4"x2"x1". The software interprets the string to determine the second size, the number of sizes in addition to the first size and second size, and the units of measure for each size. If you do not include a unit of measure in the string, the unit of measure for the first size, defined under First Size Units, is used.

Geometric Industry Standard

Type the code that represents the source used in the preparation of the catalog data. Valid codes are listed in the AllCodeLists.xls workbook on the Geometric Industry Standard sheet in the Codelist Number column.

First Size Schedule

Type the code that represents the schedule (or thickness) for the first size end. Valid codes and short descriptions are listed in the AllCodeLists.xls workbook on the Schedule Thickness sheet in the Codelist Number and Schedule Thickness Short Description columns.

Second Size Schedule

Type the code that represents the schedule (or thickness) for the first size end. Valid codes and short descriptions are listed in the AllCodeLists.xls workbook on the Schedule Thickness sheet in the Codelist Number and Schedule Thickness Short Description columns.

Wall Thickness for Port 1

Specify the wall thickness, with units, for port 1.

Reinforced Wall Thickness for Port 1

Specify the reinforced wall thickness, with units, for port 1.

Wall Thickness for Port 2

Specify the wall thickness, with units, for port 2.

Reinforced Wall Thickness for Port 2

Specify the reinforced wall thickness, with units, for port 2.

Wall Thickness for Port 3

Specify the wall thickness, with units, for port 3.

Reinforced Wall Thickness for Port 3

Specify the reinforced wall thickness, with units, for port 3.

Wall Thickness for Port 4

Specify the wall thickness, with units, for port 4.

Reinforced Wall Thickness for Port 4

Specify the reinforced wall thickness, with units, for port 4.

Wall Thickness for Port 5

Specify the wall thickness, with units, for port 5.

Reinforced Wall Thickness for Port 5

Specify the reinforced wall thickness, with units, for port 5.

See Also

AllCommon Sheets and Disciplines
AllCommon Sheets