Maps a Smart 3D attribute to the corresponding Isogen attribute.
Open the grid, and then define the attributes listed below as needed.
-
Display Name specifies a text string for the attribute. You select this text string in the Attributes folder under Drawing Frame. The Display Name Drawing Number must be mapped to Isogen attribute DRG as of Smart 3D version 6.0. In previous versions of the software, Drawing Number was mapped to the Isogen attribute DRAWING-NUMBER.
-
Name specifies an Isogen attribute. You can customize the mapping of Isogen attributes ATTRIBUTE11 through ATTRIBUTE99. ATTRIBUTE1 through ATTRIBUTE10 are reserved by Hexagon. We recommend that you start adding your own attributes from ATTRIBUTE21. The reserved attributes are defined as follows:
Attribute Name |
Definition |
|
ATTRIBUTE1 |
Maximum Working Pressure |
|
ATTRIBUTE2 |
Maximum Testing Temperature |
|
ATTRIBUTE3 |
Maximum Testing Pressure |
|
ATTRIBUTE4 |
Extracted By |
|
ATTRIBUTE5 |
Checked By |
|
ATTRIBUTE6 |
Approved By |
|
ATTRIBUTE7 |
Parent Piping System |
|
ATTRIBUTE8 |
Fluid Code |
|
ATTRIBUTE9 |
Extraction Date |
|
ATTRIBUTE10 |
Reserved for Future Use |
Defines:
Option Switch - N/A
I-Configure - S3D.AttributeMAP