Local Sketches - Intergraph Smart 3D - Help - Hexagon

Intergraph Smart 3D Isogen Isometric Drawings

Language
English
Product
Intergraph Smart 3D
Subproduct
Drawings and Reports
Search by Category
Help
Smart 3D Version
13.1
Isogen Version
13.0(2016)

Stores the properties for local detail sketches and information notes.

Open the grid, and then define the attributes listed below as needed.

  • Identifier specifies the detail sketch or Information note string identifier. The following are examples:

    • Detail Sketch - SK1.sha

    • Information Note - note_N.sha or note_S.sha

  • For SmartSketch, the file format extension must be shown in the ID, such as SK1.igr.

  • Inclduding _N (for example, GenNote_N.sha) as part of the information note name signifies a general note, which is output on every sheet.

  • Including _S (for example, SpecNote_S.sha) signifies a specific note, which is only output on the sheet on which the component having this particular note attached is output.

  • Height specifies a single value for the height of the detail sketch or information note in millimeters.

  • Width defines the width of the detail sketch/information note. Type a single value in millimeters.

  • Label X specifies the horizontal cross-reference position measured from the bottom left corner of the detail sketch in millimeters.

  • Label Y specifies the vertical cross-reference position measured from the bottom left corner of the detail sketch in millimeters.

  • Text Height sets the text height to be used. Type a value in millimeters or inches, depending on the setting of the drawing units.

The value that displays on the Local Sketches icon is a count of how many attributes have been defined for output in the user-defined cut list. The example below indicates that three attributes are currently defined.