Standard Weld Summary Box
|
Weld Box header details (line 1): |
|||||||||
|
-412 |
WELD |
SHOP |
WELD |
WELDER |
VISUAL |
NDT |
HARD |
S.R |
FAB.QA |
|
Continuation of Weld Box header details. (line 2): |
|||||||||
|
-413 |
NO |
/FLD |
PROC |
ID |
ACCEPT |
NO |
NO |
ACCEPT |
|
The first column of this Weld Summary box is used for the software-generated weld
number and optional prefix. The second column is for Weld category and contains the
Shop / Field / Offshore indicators. This must be taken into account when making any
changes to either of these two ATexts.
|
-414 |
S |
Weld category identification - Shop. |
|
-415 |
F |
Weld category identification - Field. |
|
-416 |
O |
Weld category identification - Offshore. |
One of the above characters is plotted in the Weld Category column (column 2), depending upon the type of weld.
User-Defined Weld Summary Box
|
-417 |
BW |
Used for weld type identifier butt weld. |
|
-418 |
SW |
Used for weld type identifier socket weld. |
|
-419 |
MW |
Used for weld type identifier miter weld. |
|
-420 |
LUG |
Used for weld type identifier LUGG. |
|
-421 |
SOF |
Used for weld type identifier slip-on flange. |
|
-422 |
SOB |
Used for weld type identifier set-on branch. |
|
-423 |
LET |
Used for weld type identifier LET, such as olet, latrolet, half coupling.. |
|
-424 |
SLW |
Used to indicate the weld type for seal welds in welding lists and reports. |
|
-438 |
SEAM |
Weld type identifier for a seam weld. |
|
-504 |
(Normally blank) |
Can be user-defined and used to identify field fit welds only when the weld category attribute is output. |
|
-507 |
RPD |
Used for weld type identifier for a basic reinforcing pad weld, when one extra weld number is requested. |
|
-508 |
LF |
Used for weld type identifier for a reinforcing pad to main pipeline weld, when two extra weld numbers are requested. (Used together with AText -509). |
|
-509 |
L4 |
Used for weld type identifier for a reinforcing pad to branch weld, when two extra weld numbers are requested. (Used together with AText -508). |
|
-510 |
(Normally blank) |
If set, it is used as the delimiter between the two material list Identifiers in the Location column of the operations box. |
|
-511 |
PAD |
Used as a part identifier in the Location column of the operations box in cases where a reinforcement pad has not been included on the material list. |
|
-513 |
TW |
Weld type identifier for a tack weld. |
|
-516 |
TRN |
Weld type identifier for a trunnion weld (The weld that connects the trunnion to the main pipeline). |
|
-517 |
5 |
Used for weld action identification for a manual weld on the operations list. |
|
-518 |
1 |
Used for weld action identification for an automatic weld on the operations list. |
|
-519 |
EB |
Used for pulled bend identification on the operations list. |
|
-520 |
RL |
Used for random length identification on the operations list. |
|
-521 |
FW. |
Used for weld type identifier for a fillet weld. (The basic weld used for connecting pipe supports to the pipeline). |
|
-522 |
(Normally blank) |
If set, it is used as an alternative to AText -422 to identify the branch connection weld(s) for a reinforced tee or cross. |
|
-523 |
(Normally blank) |
If set, it is used as an alternative to AText -422 to identify the branch connection weld(s) for an angled (not 90°) reinforced tee or cross. |
|
-524 |
(Normally blank) |
If set, it is used as an alternative to AText -422 to identify the branch connection weld(s) for an angled (not 90°) set-on tee or cross. |
|
-525 |
(Normally blank) |
If set, it is used for the weld type identifier for any olet type component with an SKEY of HCSC or HCSW. |
|
-526 |
(Normally blank) |
If set, it is used for the weld type identifier for a reinforcement pad to main pipeline weld on an angled branch when two extra weld numbers are requested. (Used together with AText -527). |
|
-527 |
(Normally blank) |
If set, it is used for the weld type identifier for a reinforcement pad to branch weld on an angled branch - when two extra weld numbers are requested. (Used together with AText -526). |
|
-528 |
(Normally blank) |
If set, it is used for the weld type identifier for a trunnion to elbow / bend connection. |
|
-529 |
(Normally blank) |
If set, it is used for the weld type identifier for a 90° non-reinforced trunnion to main pipeline weld. |
|
-530 |
(Normally blank) |
If set, it is used for the weld type identifier for an angled non-reinforced trunnion to main pipeline weld. |
|
-531 |
(Normally blank) |
If set, it is used for the weld type identifier for a 90° reinforced trunnion to main pipeline weld. |
|
-532 |
(Normally blank) |
If set, it is used for the weld type identifier for an angled reinforced trunnion to main pipeline weld. |