-
Click Tools > PinPoint.
-
Select the Relative Tracking
option on the PinPoint ribbon.
-
Select the Rectangular Coordinates
option on the PinPoint ribbon.
-
Click Route Pipe
on the vertical toolbar.
-
Select the run starting point.
-
Define the pipe run properties on the New Pipe Run dialog box, and then click OK.
-
In the PinPoint ribbon, type the easting, northing, or elevation distance (from the PinPoint target) to route the pipe run.
-
Click in the view to route the pipe run to the specified point. The software moves the PinPoint target to the new location.
-
In the PinPoint ribbon, type the easting, northing, or elevation distance to route the pipe run.
-
Continue defining points as needed.
-
Select the ending point of the pipe run. Right-click to end a pipe run.
If the piping specification that you selected has service limits defined, you must
define at least one temperature value and one pressure value for the pipe run. You
do this by selecting Temperature and Pressure from the Category option.