Retrieve documents - Intergraph Smart 3D - Administration & Configuration - Hexagon

Intergraph Smart 3D Integration - SmartPlant Foundation

Language
English
Product
Intergraph Smart 3D
Subproduct
Integration
Search by Category
Administration & Configuration
Smart 3D Version
13
SmartPlant Foundation / SDx Version
10
  1. Click SmartPlant > Retrieve to display the Retrieve Dialog Box.

    • This command is available only if you have registered the active model using the SmartPlant Registration Wizard. For more information, see the Project Management User's Guide. You must also install the SmartPlant Client and SmartPlant Schema Component to use the Retrieve command. For more information, see the Intergraph Smart 3D Installation Guide and the Integration Setup Guide.

    • If you are logged on with a user name that is not defined in the integrated environment, you are prompted to log on when you use this command.

    • The Retrieve command searches the SmartPlant Foundation model for documents that are ready to be retrieved. These documents appear in the Documents to retrieve list on the Retrieve dialog box.

  2. Specify the type of document to be retrieved in the Document type box.

  3. Select the appropriate option in the Show section.

    New documents provides a list of only the new documents that have not yet been retrieved.

    New versions of retrieved documents provides a list of latest versions of documents published since they were last retrieved.

    Unchanged documents provides a list of documents that have not changed from the previous retrieve.

    Documents of all owning groups provides a list of documents associated with all owning groups. If an owning group is not configured to the user, the documents associated with it are disabled and cannot be retrieved.

    SHARED Tip Select Documents of all owning groups option to list the documents associated with all owning groups.

  4. Select the check box beside each document that you want to retrieve in the Documents to retrieve list. To help identify the documents, review the details in the Type, Revision, Version, and Last Retrieved columns.

    SHARED Tip To quickly select the entire list, click Select All. To quickly cancel the selections, click Clear All.

  5. For each document that you checked, use the Retrieve Option column to specify whether you want to retrieve the document with the Latest data, As published or CDW data.

    • Select As Published to retrieve only the data that the authoring tool originally published, along with the selected revision and version of the document at the time of publishing.

    • Select Latest Data to retrieve data by comparing the information in the database with the published XML file and update the objects that were originally published.

    • Select CDW data to retrieve the data by updating the property values contained in a published XML with those contained on the corresponding CDW object.

  6. Click OK to retrieve the specified documents.

    The software displays a message box you when the retrieval process is complete.

  7. Click View Log to verify error or information messages.

  8. Click Close.

  • In the Project Management environment, the Deleted and Unclaimed Objects document is retrieved automatically every time you retrieve, if there is a newer version of this document since the last retrieval. The document is not included in the list, but it is retrieved automatically to ensure that the applicable information is updated.

P&ID Documents

After retrieving, you can use the View P&ID command and the P&ID Viewer to review data that requires attention. Any items that need to be addressed appear in green, red, and purple in the P&ID Viewer. For more information about colors, see Set Correlation Status Colors Dialog Box.

You can use the Compare Design Basis command to see property differences. For example, if you have custom equipment in your model, you may need to modify select list values in the Custom Equipment reference data. You may have to perform routing tasks from the P&ID and place inline components and instruments. Refer to task-related documentation for assistance in correcting data from the P&ID.

To allow the placement of piping components from a retrieved P&ID, you must specify the value SmartPlant 3D for the Use Piping Specification property in SmartPlant P&ID Options Manager.

Electrical Documents

After retrieving, you can use the View Cable Schedule command to review and update the cables. For more information, see View Cable Schedule.