Insert a component - Intergraph Smart 3D - Administration & Configuration - Hexagon PPM

Intergraph Smart 3D Integration - Project As-Built with HxGN SDx

English (United States)
Intergraph Smart 3D
Project As-Built with SDx
Search by Category
Administration & Configuration
Smart 3D Version
  1. Click Insert Component Command on the vertical toolbar.

  2. Select a pipe, pipe end, component port, or nozzle on which to insert the component. If you select a pipe, the point at which you identify the pipe is used as the placement point. You can insert taps on native parts or SIO parts.

  3. Select a component type and option in the Type and Option boxes.

  4. If needed, change the position of the component using Flip, Reference Position, and Angle options on the ribbon.

  5. Click Finish.

When placing components on a pipe, the software will use the divisor point location as the placement point if the divisor point glyph SSK_DivisorPoint is displayed when you select the pipe. This functionality allows you to place a component at the mid-point of a pipe, for example. You can set the number of divisor points on the Tools > Options > SmartSketch 3D Tab.