SDx Synchronization Status Window - Intergraph Smart 3D - Administration & Configuration - Hexagon PPM

Intergraph Smart 3D Integration - Project As-Built with HxGN SDx

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Administration & Configuration
Version_SThreeD_Custom
13
SPFVersion_custom
10

Shows the synchronization status for each registered Smart 3D model in the connected site. The graphic below identifies key parts of the SDx Synchronization Status window.

1 - Details Grid

Displays the following information by default for each model listed in the grid. You can drag column headers and drop them on the bar to group the data by that column.

Model Name

Displays the name of the registered Smart 3D model.

Region/Area

Displays the location of the model.

Sync to SDx

Displays the percentage of completion for the current synchronization operation from the Smart 3D model to SDx.

Sync from SDx

Displays the percentage of completion for the current synchronization operation from SDx to the Smart 3D model.

Model Purpose

Displays the purpose of the model. The Model Purpose property is defined when the Smart 3D model database is created.

Site

Displays the name of the Smart 3D site database to which the Smart 3D model belongs.

Server

Displays the name of the server on which the site database resides.

2 - Column Chooser

Enables you to specify which columns to display in the grid. Click Column Chooser to open the columns list. To display a column in the grid, select its check box. Clear the check box to remove the column from the grid.

3 - Summary Panes

Provides details about the synchronization status for each model in the grid. Three summary panes display: Details, Synchronize to SDx Status, and Synchronize from SDx Status.

  • To view details about the synchronize to SDx operation for the selected model, click Synchronize to SDx Status Report in the upper-right corner of the Synchronize to SDx Status pane. See Generate a Synchronization Status report.

  • To re-synchronize objects that failed during the synchronize to SDx process, click Re-synchronize in the Synchronize to SDx Status pane to open the Re-synchronize dialog.

  • If the synchronize from SDx operation fails, you can Restart Synchronize from SDx in the Synchronize from SDx Status pane to restart the process on the selected model.

4 - Refresh

Updates the display in the grid when new models have been added to or removed from the site database.

5 - Close

Closes the window.